
UNSOLVED
Closed
81000 video cable reseating?
OK maybe I'm blind, but I can't vind Rance's post about reseating the video cable on the 8100, that doesn't void the warranty. This is getting really annoying, the flaky screen, color changes, hold problems.
Responses (5)
Solutions (0)
- jhankins:
If you feel technically competent in doing so, you can try to reseat this "flex cable" yourself. Click here for online instructions. Just remove the hinge cover and then reseat the cable. It is not necessary to remove any screws. This procedure will definitely not void your warranty unless damage is caused to the system (an unlikely situation if you are careful).
Otherwise, to have service arranged if the system is under warranty, you can, 1) contact our Mobile Computing Hotline at 800-822-8965 for Corporate/Government Accounts or at 800-247-9252 for Direct accounts; or 2) you can email mobile_support@dell.com. If you do choose to email, make certain to include a brief description of your issue, with your service tag and the troubleshooting steps you have followed.
- I have the same problem with my I81K. On boot and through the startup I would see Horizontal lines washout the Dell boot screen and then the XP splash screen , and as you, they display would be unreadable and force me to do multiple reboots, most of the time with little or no effect.
I did have some results when I changed the screen resolution down to 800x600 and the colors to 16 Bit (From 32); the display seemed to settle down at this lower resolution.By doing a series of reboots and slowly moving to the higher resolutions, the system would recover somewhat, at least to point where I could get into the Forum to read this post.
Dell will be sending a Service Representative out to test the unit, and I'll let you know what they discover.
Oh, reseating the video cable had no effect; If you do go there, make sure you remove all your AC and Battery before you fuss with it...
Dell Inspiron 8100
Pentium III, 1.2GHz; 30GHD; 512MByte; UXGA; Nvida GeForce 32MB; XP Home; A11 BIOS; 30.82 Nvida Drivers;
Darn good machine, just a little sick.
I have exactly the same flickering screen problem (just started on a 2,5 years old 8100), and I cannot find the instructions detailing how to reseat the LCD Flex cable. Can someone please post a link to the doc, the old link doesn't work
Thanks in advance.

ritual129
4 Posts
215
0
Posted August 15th, 2002 05:00
I can't seem to find it myself either. Here is a link to a document on DELL's website that shows you how to reseat the flex cables.
http://premiersupport.dell.com/docs/systems/ins8100/remove.htm#1050927
If you have problems accessing premier support, let me know.
ritual
------------------------------------------------------
My Inspiron 8100 Notebook
1K859 Assembly,Base Bottom,I8100K INSPIRON
3E454 Processor,Pentium III,TUL,1.13G,512K
0E426 Hard Drive,20GB,IDE
512MB Crucial RAM
5J149 GPU, NVIDIA GeForce4 Go 440 64MB
8H835 Subassembly,LCD,SXGA,15+,IBM,I8100
****************************************
Click to see My H²O-cooled Overclocked Beast
Liquid Cooled P4 2.26GHz 533MHz FSB O/C to 2.50GHz
512MB PC1066 RDRam Kingston
ASUS P4T533-C Motherboard
Liquid Cooled ASUS GeForce4 Ti4600 Graphics
80GB Maxtor ATA133 Hard Drive
------------------------------------------------------