
UNSOLVED
Usb problem with Nokia DKU-5 USB cable
Computer:
Dimension 4700
Pentium 4 (3.0ghz)
1gb Ram
80gb HDD
Well I get the DKU-5 cable to connect my nokia 3100 to my computer, I follow the nokia instructions but when I connect my cell phone to the USB port I get a USB problem the message says something like this:
“A USB device its malfunctioning and its not properly identified”
Well I try almost everything, plug the cell phone to another USB port, reinstall all drivers of the nokia phone and plug the cable without the cell phone attached and in this case I get the proper configuration of the drivers but when I try to write data to the cell phone something happens and the communication of the program with the phone breaks, I can read data from the phone but I can’t write data.
I tried to see if the cable was the problem but when I plug it into my Inspiron 5150 and my Dimension 4600, I didn’t get any trouble I can write and read data from the cell phone. I thought that the USB driver should be the problem and I downloaded and installed the latest Intel chip set drivers but that didn’t work.
Any ideas?
Sorry for my bad English but I am not from an English speaking country.
USB driver version: Intel 82801FB/FBM USB Universal Host Controller ver.6.0.0.1011
Responses (2)
Solutions (0)
Heyder_Lino
14 Posts
233
0
Posted April 21st, 2005 23:00
Can you help me to solve the same problem in the installation of the driver Nokia DKU-5 for use with Nokia 6100 in the Latitude X300?
Thank´s.
Heyder

DELL-Chris M
Community Manager
•
56891 Posts
•
232143 Points
233
0
Posted January 27th, 2005 19:00
Try the USB ports on the rear of the system.
DELL-Chris M (old account)
#IWork4Dell