
UNSOLVED
System Temperatures HOW?
How can I Check system temperatures: CPUs memory, drives. . .. is there a program from Dell or Intel???
Alfredo Comparetti at Speedfan is working on a beta of the program Speedfan for me. Not done yet
Alfredo Comparetti at Speedfan is working on a beta of the program Speedfan for me. Not done yet
Responses (10)
Solutions (0)
Davor Buvinic
12 Posts
569
0
Posted October 2nd, 2006 00:00
On my Precision 390 (E6300 CPU), the current version of Everest show each cpu-core temperature.The Intel Thermal Analysis Tool also works.- DavorDavor Buvinic
12 Posts
569
0
Posted October 5th, 2006 02:00
Are you sure that Everest don't work for you? You must try the last version (3.01)Which CPU(s) has your PWS 490? Xeon 50xx series? or Xeon 51xx series? I think that the 51xx has a digital thermal sensor in the CPU, so Everest can read it (like the Core 2 Duo CPUs).- Davor- Computer:
Computer Type ACPI Multiprocessor x64-based PC
Operating System Microsoft Windows XP Professional x64 Edition
Motherboard:
CPU Type DualCore Intel Xeon 5050, 3000 MHz (18 x 167)
Motherboard Name Dell Precision WorkStation 490
Motherboard Chipset Intel Greencreek 5000X
Everest 3.01.752 still not working. Davor Buvinic
12 Posts
569
0
Posted October 24th, 2006 17:00
OK. You have the Xeon from the 5000 series.
As far as I know, these processors dont have the digital thermal sensors, so Everest can't obtain the information.
An alternative is to obtain the information via the motherboard. Unfortunately, the protocol to do that is propietary from Dell.
- DavorDavor Buvinic
12 Posts
77
0
Posted October 24th, 2006 19:00
@klinetime: The sensors that I mentioned are the "Digital Thermal Sensors" (DTS), which are on the core of the CPU and you can interrogate directly via CPU registers.
The Core 2 Duo and the new Xeon (5100 series) implement the DTS.
Another way to obtain the CPU temperature is to query a subsystem on your motherboard about the information on the CPU thermal diode. You can't obtain this information directly from the CPU. You must query this subsystem.
The protocol to do that is propietary from Dell. Your Precision modulate the fans according to this information.
On my Precision, I can obtain the temperatures because Everest read the DTS registers. No need to mess with the thermal diode and the Dell propietary protocol!
- Davor- FYIFound this on the Intel siteThe Intel Xeon processor has unique system management capabilities. One of these is the ability to monitor the processor's core temperature relative to a known maximum setting. The processor's Thermal Sensor outputs the current processor temperature and can be addressed via the System Management Bus (SMBus). So it looks like the 5050 chip has the sensors.

skip01
155 Posts
569
0
Posted September 18th, 2006 00:00
http://www.diefer.de/i8kfan/index.html