UNSOLVED

BillyBoy128

updated

18 years ago

B

BillyBoy128

21 Posts

0

13278

June 13th, 2008 16:00

Standby button keeps shutting down computer NOT SOLVED

Since I reinstalled my OS XP SP2 home Dell Dimenson; no matter what I set my standby button to do, it shuts my computer down. I've had it set to do nothing , standby, ask me what to do in the advanced settings box and no mattter the setting it shuts the computer down.  When i go to start shut down and Standby it goes into stanby but when I bring it out, it shuts my computer down.  Any real suggestions, please dont mark it sa sloved unless you really have read the post and the problem is solved!  I'd Appreciate any suggestions, its not a major problem but annoying and I'd like to use standby if possible.
  • Davet50

    6 Operator

    •

    14442 Posts

    656

    0

    Posted June 13th, 2008 16:00

    Only the op(orginal poster) can mark a thread solved...

     

    sorry that did not fix your issue..

     

    Is this a non standard keyboard that needs drivers installed?

    Message Edited by Davet50 on 06-13-2008 01:29 PM
  • BillyBoy128

    21 Posts

    656

    0

    Posted June 13th, 2008 16:00

    It's the Dell enhanced usb keyboard ,I've been using the same driver for  years without a problem.  I googled the problem  and found a few posts with the same problem, but no real solutions. Dell has other software for it to use the extra buttons on the top, but I dont use them anymore so I never downloaded it again.  I still apprciate your help,I mistakenly hit the solved button it's nothing but annoying!:smileyhappy:
  • BillyBoy128

    21 Posts

    656

    0

    Posted June 14th, 2008 05:00

    I have a Dimension 4300 , and I've tried updating the driver using the device manager, and no newer one was found.  It's the same driver I've used before the reinstall of my OS.  The other software is the one for the Hotkeys which i never used. As far as drivers i ran Pc Pitstops Driver Scan and it didnt list anything new for the keyboard.  The Only chipset drivers Dell lists are optional.
  • The_Namek

    2 Intern

    •

    2794 Posts

    656

    0

    Posted June 14th, 2008 05:00

    BillyBoy128,

    What driver for the enhanced USB keyboard have you been using for years and did you reinstall that driver software after you performed the OS reinstall? If it worked before & you installed it again then the results should be the same as before. You didn't say what model your Dimension is (I didn't read whatever other threads you started about this problem but that info always needs to be included when a new thread is started) so it's possible your system needs a chipset driver & perhaps Dell desktop system software installed before any other device drivers and you didn't install them in the correct order.

  • The_Namek

    2 Intern

    •

    2794 Posts

    656

    0

    Posted June 14th, 2008 05:00

    If this keyboard was part of the entire original system package then its driver software would've been installed at the factory when the computer was assembled. After you reinstalled the OS it would be gone though. You typically won't find proper drivers by searching online through Device Manager or letting 3rd party PC tune-up utilities like PC Pitstop try to locate them. You need to get drivers from the manufacturer of the device or computer. In your case you should have a driver for the keyboard located on one of the CDs that came with the computer. If not you can find one in the downloads section for your system model here on the Dell support site.
  • BillyBoy128

    21 Posts

    656

    0

    Posted June 14th, 2008 21:00

    I installed the Dell enhanced Quietkey usb keyboad driver, and the Standby buttton still does the same thing.  It goes into stand by for a few sections and then the computer still shuts down.  IF I set it to ask me what to do, it shows the shut down optons and then shuts down automatically!
  • The_Namek

    2 Intern

    •

    2794 Posts

    656

    0

    Posted June 14th, 2008 23:00

    Can you post all the drivers you installed after you reinstalled Windows in the order you installed them?