UNSOLVED
S
stealthgeek
1 Rookie
•
63 Posts
0
5135
September 12th, 2006 02:00
SLI enabled?
I ordered my XPS700 E6700 with a single 7900GTX. I have just ordered a second Dell 7900 GTX with SLI jumper included and was wondering the procedure to get it going. Do I need to go into the BIOS or something to enable SLI? Or, do I just plug in the new card, connect the two with the SLI jumper, turn on the system and follow some automatic hardware wizard thing?
Thanks in advance :smileyhappy:
redsox1907
48 Posts
130
0
Posted September 12th, 2006 03:00
Thanks, i was wondering the same thing for latter on.stealthgeek
1 Rookie
•
63 Posts
130
0
Posted September 12th, 2006 03:00
:smileyhappy:Thanks a lot
jsrder
903 Posts
130
0
Posted September 12th, 2006 02:00
Install the card, connect it's pwr cable, install the SLI jumper and then boot to the OS. When you reach the XP desktop - you should get a pop up bubble by the sys tray which says you can enable SLI - click on the pop up bubble.
If that doesn't happen, right click on desktop -> properties -> settings -> advanced -> nvidia tab. You should then see an appropriate choice - don't have it here, it's something like GPU Performance for one of the menus.
Have no fear. :smileywink:
Message Edited by jsrder on 09-11-200610:49 PM