UNSOLVED

Qz05

updated

21 years ago

Q

Qz05

69 Posts

0

2147

July 17th, 2005 19:00

Problems with Old D4400

Okay, i am re-installing windows on my old D4400 and it always restarts when it gets to formatting the Hard Drive.  This is a real annoyance as i cant get windows on there.
  • ejn63

    11 Legend

    •

    87469 Posts

    •

    321256 Points

    302

    0

    Posted July 17th, 2005 19:00

    Boot and run the Dell diagnostics on the RAM and hard drive (full set of extended tests).
  • shesagordie

    12 Elder

    •

    46017 Posts

    302

    0

    Posted July 17th, 2005 20:00

    Qz05.

    A solid amber power LED is normally a power supply failure, you can check by first unpluging the power cable, open case and disconnect the power cables from all the drives, remove the PCI cards and try to power on.  If nothing changes, then replace the PSU.

     http://support.dell.com/support/edocs/systems/dim4400/solve.htm#1077849

    Bev.

     
  • Qz05

    69 Posts

    302

    0

    Posted July 17th, 2005 20:00

    Ahhh, problem fixed guys!  Thanks for the help!

    The CMOS battery needed replacing, hehe...

  • Qz05

    69 Posts

    302

    0

    Posted July 17th, 2005 20:00

    I dont have a Dell Diag disc.  The computer didnt come with one.
  • Qz05

    69 Posts

    302

    0

    Posted July 17th, 2005 20:00

    Thats what i thought but so far the errors have been quite random.  I may end up doing what i did with my other Dell and re-build it into a different case with a proper mobo along with a decent bios.
  • ejn63

    11 Legend

    •

    87469 Posts

    •

    321256 Points

    302

    0

    Posted July 17th, 2005 20:00

    Open the case, determine the make of the hard drive, and download the test utility from the manufacturer.

    Also download and run memtest86 (www.memtest86.com).
  • shesagordie

    12 Elder

    •

    46017 Posts

    302

    0

    Posted July 17th, 2005 20:00

    Qz05.
     
    Before formatting the hard drive, did you delete all exsisting partitions?
     
    Prior to installing, remember to disconnect all external peripherals from the computer, except the keyboard, monitor and mouse. 
    While installing, delete all existing partitions (Paragraph 5) when you are prompted, then remake and format
    them (Paragraphs 6 & 7), following by installing XP.
     
     
    Bev.
     
     
  • ejn63

    11 Legend

    •

    87469 Posts

    •

    321256 Points

    302

    0

    Posted July 17th, 2005 20:00

    Reseat the memory moudules and try again. You've got one of three possible failures - memory, mainboard, and power supply - you'll have to try a process of elimination to figure out which.
  • Qz05

    69 Posts

    302

    0

    Posted July 17th, 2005 20:00

    Ahh, i found a copy of the diag..

    However, when i ran it i did the memory tests first and after about 10 seconds the computer turned itself off and came back on in standby.  The power button was orange and not green and the monitor didnt come on.

  • shesagordie

    12 Elder

    •

    46017 Posts

    69

    0

    Posted July 17th, 2005 21:00

    Qz05.
     
    That's great, Thanks for the heads up.
     
    Bev.