UNSOLVED

aartdesigns

updated

21 years ago

A

aartdesigns

17 Posts

0

16216

October 1st, 2005 14:00

It's A Question of Memory...

I have noticed that the reported RAM for this computer (XPS GEN5 / Service Tag: GZTYG81) is 3.25GB. This system is supposed to have 4.0GB installed.

On every other system I own, or have ever worked on, the reported amount of RAM is the full amount. 1.0GB shows as 1.0GB, 512MB shows 512MB, etc. (unlike hard drives, which are notoriously miss-leading. 100GB is actually around 89-94GB, or some fraction of it's advertised size. You know what I mean.)

Question. Is this number, 3.25GB, indicative of some issue with the RAM itself or do you have knowledge of RAM being mis-represented in a diminished capacity (less than what it should be)?

Best regards,

Aron Lasky
Air'n Art Designs
aron@aartdesigns.com
www.aartdesigns.com
661 263-8218 PH
661 310-3930 CP
  • Skybird

    1 Rookie

    •

    10871 Posts

    658

    0

    Posted October 1st, 2005 16:00

    It is not me saying that.  It is perhaps Microsoft.  The information I
    posted for you is out of the Dell Service Manual and as I read it
    Microsoft Windows can only use a maximum of 4Gb, but the amount of memory
    available to the operating system is less than 4 Gb.  To me it appears
    Windows is using 3.25Gb and some other components have clained the 750Mb.
     

     
  • Skybird

    1 Rookie

    •

    10871 Posts

    658

    0

    Posted October 1st, 2005 16:00

    From the XPS GEN5 Service Manual .........

    Your computer supports a maximum of 8 GB of memory when you use four 2-GB DIMMs.
    Current operating systems, such as Microsoft® Windows® XP, can only use a maximum
    of 4 GB of address space; however, the amount of memory available to the operating
    system is less than 4 GB. Certain components within the computer require address
    space in the 4 GB range. Any address space reserved for these components cannot be
    used by computer memory.
     
  • aartdesigns

    17 Posts

    658

    0

    Posted October 1st, 2005 16:00

    I'm not sure I completely understand that explaination... Does what mean what you are saying... that 750MB is waisted... ineffectual?

    Message Edited by aartdesigns on 10-01-2005 10:37 AM

  • Skybird

    1 Rookie

    •

    10871 Posts

    658

    0

    Posted October 1st, 2005 17:00

    That is not what you asked in your first post.  I only passed on to you the
    information that was available to me by Dell and Mircosoft.  Please do not
    hold me responsible for the information.  Perhaps you may want to post this
    again and someone who has the answer to you final post may respond. 
  • aartdesigns

    17 Posts

    658

    0

    Posted October 1st, 2005 17:00

    That does not explain why the BIOS only shows 3.25GB
    BIOS is before Windows even gets loaded...
  • aartdesigns

    17 Posts

    658

    0

    Posted October 1st, 2005 20:00

    Skybird, I am getting the distinct impression that you feel my questions are personally directed to you. They are not. I never suggested that I was holding you personally responsible for anything LOL... Somehow we got off on the wrong foot.
    I was simply trying to understand your response... be it quoted from a source or a personal opinion. A response which I very much appreciate, by the way.

    No, I was merely hoping you could elaborate, if possible. It was not a personal attack or challenge. Good grief.
    I realize that my first post did not mention the fact that the BIOS showed the discrepancy that is reflected in the properties of "My Computer". That was my omission. I apologize. It only became a consideration after your information.

    So, let's rephrase, shall we...

    Does anyone out there have any thoughts, or references, as to why a computer system which physically has 4GB of RAM installed by Dell, should only show 3.25GB in the properties of My Computer AND in the BIOS?

    How's that?
  • Skybird

    1 Rookie

    •

    10871 Posts

    658

    0

    Posted October 1st, 2005 21:00

    Browsing Microsoft has yielded the following article that I leave to
    you to see if it helps explain things ...............
  • g_repa

    16 Posts

    658

    0

    Posted October 9th, 2005 19:00

    One other thought. You may have already done this. Run the diagnostic tests on your memory and see if there are any problems.
  • goalie28

    104 Posts

    658

    0

    Posted October 11th, 2005 21:00

    aartdesigns,

    What skybird was posting is correct, if somewhat diluted of technical details.

    When your system starts POST after you press the power button, the BIOS starts initializing devices and configuring memory for use. Most devices in the system have to have what's called memory mapped I/O space so that the BIOS (and later the OS) can talk to them and have them stay configured while the system is running. This memory mapped I/O space is a chunk of memory. A 32 bit system can only address 4GB of memory (2^32). So, both the physical and virtual limit on addressable memory is 4GB. The BIOS sets up its memory mapped I/O space starting at the 4GB boundary and works its way down. Some devices, like PCI-E graphics, eat up large chunks at a time. In systems with physical memory well below the 4GB boundary (like your 1GB machine), the memory mapped I/O lives in virtual memory space and is transparent to the user. However, if your machine has over 3GB of physical memory in it, the memory mapped I/O encroaches on physical memory addressing space and thus the system reports back less usuable memory than is physcially in the machine.

    Hope this helps explain the situation.

    -goalie28