UNSOLVED

BMVincent

updated

26 years ago

B

BMVincent

4 Posts

0

1176

February 19th, 2001 11:00

Hibernation Problems

If i leave my computer on for and extended period of time it locks up whenever the monitor goes into power save. I'm not totally sure if the computer is completely locked. To check this is pressed the numlock key on the keyboard to see if i could toggle the light and it switched on and off. The HDD is still running and all the fans are on so i don't think it is in complete hibernate mode. so is it doing? Also i have everything about hibernating disabled and the power scheme is ALWAYS ON. The only thing that is set to go into power save is the monitor obviously. Help out:)

(edited)

  • dclambert

    46 Posts

    356

    0

    Posted February 19th, 2001 14:00

    Sounds good. I have heard that some of the more complicated screen savers, like open gl, could cause problems like this. I've been using the default savers that come with the destop themes lately, so maybe that's the fix.

    Dan
  • BMVincent

    4 Posts

    356

    0

    Posted February 19th, 2001 14:00

    This morning i left my computer idle for about an hour after DISABLING my open gl screen saver that i was using and it didn't hang up, i'm going to check into updating the video drivers to see if that can help at all so open gl ss's can be used. I'll post anything I find:)
  • dclambert

    46 Posts

    356

    0

    Posted February 19th, 2001 14:00

    Boy, this seems to be a global problem and may need to be addressed with a Dell recall?

    I've had the problem a couple of times after extended sleep, but haven't isolated the cause. Post back if you find out anything further, and I'll do the same. I've got my system stand-by disabled, but not the monitor or hard drive at this point.

    Dan
  • jsemrod

    6 Posts

    356

    0

    Posted February 19th, 2001 20:00

    some of these problems are caused by the power saver and the screen saver clashing; for example, when you move the mouse after the monitor is in power saving mode, which program gets control to give you control back? also which program really put the system into power saver mode?
  • Hoz

    35 Posts

    356

    0

    Posted February 20th, 2001 13:00

    I run a NAPSTER screen saver and when my 4100 goes into hibernation or I put it into hibernation, if after a long period of time and I wiggle just the mouse, it seems to be very very slow at coming out of hibernation, if at all.. I then, through trial and error, found that just walking up and tapping the space bar instead, that it came out of hibernation without any problem.
    I don't know if this is of any help to you or not, but it works for me.
    Good Luck

    Hoz


    4100, 933mhz, 128 RAM, P3
    19" p991 Trinitron Monitor
    Windows ME
    _NEC DV-5700A CD/DVD ROM Drive
    LG CD-RW CED-8080B Burner
    40 gig HD, NVIDIA GeForce 256 AGP
    Creative SB Live Value (WDM)
    HP 970 (usb) printer & 5300C (usb) scanner
    Altec Lansing Sound
  • pheffler

    1 Message

    356

    0

    Posted February 22nd, 2001 01:00

    It sounds like you guys have the same problem I have: after a period of non-use (even an hour), the power light on my monitor will flash. I move the mouse, or hit enter a few times, but nothing helps. I have to reboot.

    We have a couple of different screen savers going. I like the classic time-honored Godfather screensaver, sounds, and themes. My 13 year-old likes some other crap.

    You guys found a potential answer?