UNSOLVED

CourageNow

updated

18 years ago

0

12267

October 7th, 2008 13:00

Hard drive failure? Perfect timing?

So over the course of the last couple days our XPS 410 (that shipped to us a little over a year ago -- 10/1/07 to be exact) has developed inexplicable hangs.  (With the drive light frozen on.)  I ran a chkdsk that didn't seem to find anything that wasn't fixable.  Then I tried the Dell PC Tools disk check and the smart short test failed.  Then I restarted and chose the 'hard drive diagonistics' selection and let it go through its paces.  It ended with a return code 7.  Does this mean the drive is bad?  And if so, is there any chance of Dell sending me a replacement?  I can't get to their online chat, of course, because my warrenty is expired.  (...by a couple days...):mansad: 

 

Thanks for any help/advice.

  • matt92109

    24 Posts

    593

    1

    Posted October 7th, 2008 13:00

    First thing I would say, unless of course you are already doing it, is to backup your hard drive contents ASAP.

    I'm not sure what the code means, hopefully someone else can shed some light on that, but if a hard drive is being finicky, it is probably in its death throes. 

    As for dell honoring the warranty - I have heard of circumstances where companies will do so if the fault occured just outside the warranty period, so I suppose it is not outside of the realm of possibility, but they are not obligated to do so.. Hard drives are not terribly expensive these days, so while it is an unwanted expense, it shouldnt hurt too much at all if dell doesnt want to help.

     

    Good luck though!

  • Merlin_AZ

    42 Posts

    593

    1

    Posted October 7th, 2008 14:00

    Image the drive as soon as possible.

    www.macrium.com/reflectfree.asp is a really good drive imager, and it's free.

    Message Edited by Merlin_AZ on 10-07-2008 11:00 AM
    Message Edited by Merlin_AZ on 10-07-2008 11:01 AM
  • 593

    1

    Posted October 7th, 2008 15:00

    Thanks for the responses.  I have Live OneCare installed which does regular backups to a network drive, but the imaging suggestion seems like a good one too.  How does that work?  I image the drive to the network, install a new drive and then restore the image...somehow?

     

    Also, if I end up buying a new drive, and suggestions for a replacement?  What's in there now is a Samsung 320M SATA 2 (7200) drive.

  • Hanspuppa

    799 Posts

    593

    1

    Posted October 7th, 2008 20:00


    @CourageNow wrote:

    Thanks for the responses.  I have Live OneCare installed which does regular backups to a network drive, but the imaging suggestion seems like a good one too.  How does that work?  I image the drive to the network, install a new drive and then restore the image...somehow?

     

    Also, if I end up buying a new drive, and suggestions for a replacement?  What's in there now is a Samsung 320M SATA 2 (7200) drive.


    The Samsung drives released earlier had some firmware issues. You might check to see if yours may be one of those.

     

    Also, you may be able to do a Dell Recovery Restore. You may have a corrupted drive.

     

  • 593

    1

    Posted October 7th, 2008 20:00

    Do you know what the nature of the firmware changes were?  As I read your post I saw that I had a Dell Support Center Alert about an updated firmware for the drive.  So I updated it.  Not sure if that will fix my problem or if I'm just putting a bandaid on a deeper problem.
  • Hanspuppa

    799 Posts

    593

    1

    Posted October 7th, 2008 21:00


    @CourageNow wrote:
    Do you know what the nature of the firmware changes were?  As I read your post I saw that I had a Dell Support Center Alert about an updated firmware for the drive.  So I updated it.  Not sure if that will fix my problem or if I'm just putting a bandaid on a deeper problem.

    Hello CourageNow, I'm sorry I don't since I did not have one I didn't pay that much attention to it. I think these firmware updates did resolve the Samsung drive problems.

     

    If you have been able to back up your data, I would try a Dell Recovery Restore, just in case the OS has become corrupted. It may not be a hard drive failure at all.

     

  • Merlin_AZ

    42 Posts

    593

    1

    Posted October 8th, 2008 03:00

    Once you image the drive to an External USB drive or network, use the emergency boot disk you create with the imaging program, then choose the image file to restore, and it will get you back to the point you were at the last backup.

    The only typical caveat is that the new hard drive should be at least the same size as the old one you're replacing.

     

    If you use the Dell recovery restore, you'll be at the point you were when you took it out of the box.

    You'll lose anything you've added since.

    Message Edited by Merlin_AZ on 10-07-2008 11:48 PM
    Message Edited by Merlin_AZ on 10-07-2008 11:50 PM
  • 593

    1

    Posted October 10th, 2008 16:00

    Thanks to everyone that replied.  And also a big thanks to Dell and Chris the mod--they actually sent me a new drive that arrived today.  Way to go the extra mile, Dell!

     

    Since I wasn't sure whether they'd be able to send me a new drive or not, I purchased a seagate drive on Tuesday and used their utilities to clone my old drive to the new one.  In general, it seemed to go OK.  I only had to hit ignore once on a read error from the old drive.  Still, the cloning operation seemed to be a success--I can start the machine from the drive....all my email is there, documents, programs, etc.  There are a few unexplained issues though.  The biggest being that my Windows Installer appears to be broken.  Trying to install/uninstall new software gives me an error about the 'Windows Installer Service cannot be accessed'.  The stumper is that the service does exist, it is in the system32 folder and it appears to be starting correctly.  (?)  Even the registry entrys look OK to me.  Could this be a weird access control issue?

     

    I'm almost to the point of wanting to reformat the new drive and start from scratch...but that is such a pain.  Any suggestions are appreciated!

     

     

  • 593

    1

    Posted October 11th, 2008 16:00

    Not sure if this will help anyone else or not, but I figured out what was causing all my problems .  After I had cloned my faulty drive, I had switched the boot order in the bios so that the new drive was the boot drive.  And Windows showed it as the boot drive.  However, underneath Windows must have still been using the other drive for some of its files.  Like maybe things aren't as drive independent in the registry as they should be or something.  Anyway, I did the clone operation again and this time not only changed the bios settings but disconnected the old drive internally and everything appears to be fine.  I can install things, explorer seems happy...things are good!

     

    Thanks.

  • Hanspuppa

    799 Posts

    72

    1

    Posted October 11th, 2008 16:00


    CourageNow wrote: Anyway, I did the clone operation again and this time not only changed the bios settings but disconnected the old drive internally and everything appears to be fine.  I can install things, explorer seems happy...things are good!

    Thanks.


    Thanks for the update. That kind of news is what I like to hear.