UNSOLVED

sepp

updated

26 years ago

S

sepp

2 Posts

0

10032

December 16th, 2000 18:00

game lockup

Everytime I play a game,for a time, the game starts to get real choppy until the game locks up. After rebooting the game then its ok for a while. When playing for about an hour it starts all over again. I don't think it is the game because this happens with every game I have. The problem may be with the vedio card or the cd-rom.
  • Tomb5

    11 Posts

    389

    0

    Posted December 17th, 2000 11:00

    If this occurs only after playing for an extended time, then i is probably your game's cache folder is becoming overloaded. Try raising the cache limit and see what happens.
  • The-Glide

    13 Posts

    389

    0

    Posted December 17th, 2000 13:00

    Tomb5,

    Please enlighten us on how to raisse the cache limit on the game itself. I am experienceing the same problem in halflife mulitplay.
    Thanks
  • Tomb5

    11 Posts

    389

    0

    Posted December 17th, 2000 22:00

    Well, I don't have Half-life so I don't know if either of these 2 methods will work. The first method is the easiest and is accomplished by varying the cache in the game configuration screen (if there is one). I am currently playing Baldur's Gate 2 and have set my cache at 250MB, but I have seen where others have set their's as high as 1gig. A second and potentially more "iffy" way is to edit the game's "ini" file by either changing the cache size shown or adding a line to the configuration section stating "Cache=xxx MB" where XXX is the size desired. I would only attempt this as a last resort.
    Another option would be to go to the game's official forum site and see if they have a technical help section. Good Luck.
  • sepp

    2 Posts

    389

    0

    Posted December 17th, 2000 23:00

    Thanx I really appreciate all of your input. Thanx Again
  • Tomb5

    11 Posts

    389

    0

    Posted December 17th, 2000 23:00

    I found this on www.planethalflife.com. It may help you some:

    From: Brian
    Subject: Getting more FPS in a CS/TFC Game
    I'll keep it short. I have a PII 300, 64MB of ram, Voodoo3 3500, with a cable modem. I usually run the game in 1024 X 768 pixels using OpenGL. Now, I personally think I can do better than like 25 and 30 fps. Sometimes I even get like 10 FPS. It's totally crazy. I even tried like 800 X 600 and I got the same problems, only thing...the graphics just look even worse in that mode. I don't know what to do. Please tell me there is a way to get more fps in a game with my hardware. Thx man


    Well Brian, Although your 3d card isn't "quite" obsolete, your processor and RAM (read-only memory) seems to almost be pushing your computer to do something that it cannot achieve. While some people may recieve high FPS counts or lower ones, it all depends on the system and it's resources. If you are playing a multiplayer game with 18-20+ people on the server, you can expect your FPS count to drop when some of the players come into view. There really isn't THAT much that you can do in a situation like this, other than switch to MiniGL since you have a 3dfx card. Also, if your systems permits, you can allocate a certain amount of RAM to Half-Life by right-clicking a Half-Life shortcut on your desktop, selecting the Shortcut tab at the top, and adding:

    "-heapsize 32000" is about equal to dedicating 32MB towards the game.

    "-heapsize 64000" is about equal to dedicating 64MB towards the game.

    "-heapsize 128000" is about equal to dedicating 128MB towards the game.

    to the Target Box. (Example: C:\SIERRA\Half-Life\hl.exe -console -heapsize 32000)

    It doesn't really matter, but you can choose to allow about 32 megs of RAM for Windows to use, meaning, if you have 256 megs of RAM, subtract 32 megs (for Windows) and put -heapsize 224000 in the Target Box (Example: C:\SIERRA\Half-Life\hl.exe -console -heapsize 224000).