UNSOLVED

honaker25

updated

25 years ago

H

honaker25

1 Message

0

5415

December 12th, 2001 03:00

freezing up

everytime i turn on my computer, it boots up and all the programs load (most of the time) and then it freezes up, does anyone know how to fix it or what is wrong?

  • Lorjune

    15 Posts

    147

    0

    Posted December 12th, 2001 04:00

    There might be to many programs starting up..:)

  • Karell

    2 Intern

    •

    2544 Posts

    147

    0

    Posted December 12th, 2001 16:00

    Honaker25,

    Thank you for using the DellTalk forum.

    Try the following troubleshooting steps below, to keep
    the system from locking up.

    I have posted two different version of the steps.
    One for Windows98, and one for WindowsME.
    Follow the one that suites the operating system you are
    currently using.
    ----------------------------------------------------------------------------------------
    Win98:
    1.Clear the startup menu.

    Follow these steps to remove programs from the startup folder:

    Right click Start.
    Click on Explorer.
    The "Start Menu" window will open.
    Click the " + " next to Start Menu.
    Click the " + " next to rograms.
    Double Click Startup.
    The icons contained in the Startup folder appear in the right pane.
    Click Edit and then click Select All.
    All the icons in the Startup folder appear highlighted.
    Place the mouse pointer on one of the icons, click and hold the mouse button down, and then drag the highlighted icons to the left pane over the Desktop icon.
    The Desktop icon appears highlighted and the Startup folder icons appear outlined over the Desktop icon.
    Release the mouse button.
    The icons from the Startup folder are transferred to the Desktop and the Startup folder appears empty.

    Close the window.
    The Desktop reappears.
    Click the Start button, click Shut Down, and click OK.
    After your computer is turned off, turn it back on again and let Windows load.
    Follow these steps to remove programs from the win.ini file:

    Click the Start button, then click on Run and then type sysedit.
    Click OK.
    This will open the System Configuration Editor.
    Close all windows except for the window labeled C:\WINDOWS\WIN.INI by clicking on the X in the upper right corner of each window.
    Near the top of the win.ini file there will be two lines beginning with ( load= and run= ). If these lines are both empty no programs are loading in the win.ini file. Otherwise, any program listed on these two lines will load at startup, and may be removed. Clearing all text to the right of the equal sign (=) prevents programs from loading from the win.ini file.
    Exit the System Configuration Editor by clicking on File, then Exit. When prompted to save, choose Yes.
    The next time you reboot your computer these programs will not load.

    2.Delete old configuration files.
    Search the system for these files, delete them.
    Autoexec.bat
    Config.sys
    Win.ini
    -Delete "All" the files and folders in the ( C:\Windows\Temp ) folder.

    3.Troubleshoot the programs running in the background.

    Troubleshooting the Startup Group

    Left-click on START | RUN.
    Type in "msconfig" in the "Open" dialog box and left-click on "OK."
    When the "System Configuration Utility" window appears, the "General" tab will be visible. Left-click on "Selective Startup."
    Remove the check marks from each choice except "System.ini," by left clicking on the check marks.
    Click the Startup tab.
    Uncheck every entry except (SystemTray)
    Left-click on "Apply" and then left-click on "OK."
    A message will appear stating that "For the changes to take place, the system must be restarted." Left-click on the "OK" button, and the system will begin the restart.

    If the problem stops, then try using the steps below, to isolate the program that
    is causing the problem.
    Repeat steps above, but instead of un-checking the entries, re-check one entry at a time until you have identified the category that is the cause of the problem.
    After you have isolated the application, utility, or device driver that is causing the problem, you will be able to proceed with further troubleshooting. One of the easiest methods to attempt a resolution is to reinstall the problematic application or device driver. The entry causing the problem can be left disabled if it does not affect system operation.

    -----------------------------------------------------------------------------------------
    WinME:
    1.Follow these steps to remove programs from the startup folder:

    Right click Start.
    Click on Explorer.
    The "Start Menu" window will open.
    Click the " + " next to Start Menu.
    Click the " + " next to Programs.
    Double Click Startup.
    The icons contained in the Startup folder appear in the right pane.
    Click Edit and then click Select All.
    All the icons in the Startup folder appear highlighted.
    Place the mouse pointer on one of the icons, click and hold the mouse button down, and then drag the highlighted icons to the left pane over the Desktop icon.
    The Desktop icon appears highlighted and the Startup folder icons appear outlined over the Desktop icon.
    Release the mouse button.
    The icons from the Startup folder are transferred to the Desktop and the Startup folder appears empty.

    Close the window.
    The Desktop reappears.
    Click the Start button, click Shut Down, and click OK.
    After your computer is turned off, turn it back on again and let Windows load.

    2.Troubleshooting the Startup Group

    Left-click on START | RUN.
    Type in "msconfig" in the "Open" dialog box and left-click on "OK."
    When the "System Configuration Utility" window appears, the "General" tab will be visible. Left-click on "Selective Startup."
    Remove the check marks from each choice except "System.ini," by left clicking on the check marks.
    Click the Startup tab.
    Uncheck every entry except (SystemTray)
    Left-click on "Apply" and then left-click on "OK."
    A message will appear stating that "For the changes to take place, the system must be restarted." Left-click on the "OK" button, and the system will begin the restart.

    If the problem stops, then try using the steps below, to isolate the program that
    is causing the problem.
    Repeat steps above, but instead of un-checking the entries, re-check one entry at a time until you have identified the category that is the cause of the problem.
    After you have isolated the application, utility, or device driver that is causing the problem, you will be able to proceed with further troubleshooting. One of the easiest methods to attempt a resolution is to reinstall the problematic application or device driver. The entry causing the problem can be left disabled if it does not affect system operation.

    3.Delete old dos configuration files:
    Autoexec.bat
    Config.sys
    Win.ini
    -Delete "All" the files and folders in the ( C:\Windows\Temp ) folder.
    ------------------------------------------------------------------------------------------



    Message Edited on 12/12/01 12:12PM by DELL_Karell