UNSOLVED

ShadyHosta

updated

22 years ago

0

10854

October 10th, 2004 16:00

Do I need a new Driver.

I don't understand much about drivers, but I have a128mb DDR ATI Radeon9700
  • Thirdrockfromsu1

    1 Rookie

    •

    366 Posts

    449

    0

    Posted October 10th, 2004 16:00

    http://www.ati.com  This is the official ati web site.  Look for the driver's area and download the current driver.

    How to properly update your video cards drivers


    *** For ATI users ***

    1: " Through "Add/Remove Programs" proceed to uninstall the ATI Control Panal, Display Driver, and finally the Uninstaller itself.....in this order.

    2: Boot up into safe mode and run Driver Cleaner. Select "ATI" from the drop down menu and click on "Clean". Do the cleaning twice to make sure that everything is cleared out.

    3: Restart your computer (normally this time) and wait for windows to go through auto detection of your hadware before continuing. Install your new drivers and restart your computer.

     http://www.driverheaven.net/cleaner  Download the driver cleaner from here

  • Thirdrockfromsu1

    1 Rookie

    •

    366 Posts

    449

    0

    Posted October 10th, 2004 16:00

    http://www.ati.com/support/drivers/winxp/radeonwdm-xp.html?type=xp&prodType=graphic&prod=productsXPdriver&submit.x=7&submit.y=6  This is the site for the latest driver for ATI.  Its the 4.9 driver and just download it.
  • Thirdrockfromsu1

    1 Rookie

    •

    366 Posts

    449

    0

    Posted October 10th, 2004 17:00

    Many of us try out different driver's to see what works best for our monitor and games we play.  You can download the latest driver and see if it makes an improvement.  It won't break your system if you clean uninstall the old driver.   Your monitor will still work, but at a low setting until you put the new driver in.  Another note, the sp-2 will have its own default driver for your card, as it did my Nvidia and ATI card.  It seemed to work just fine without downloading or installing another driver.  Try it out.  I have SP-2 on my reformated and re-installed windows without one glitch. 

     

    Message Edited by Thirdrockfromsun on 10-10-2004 02:45 PM

  • 449

    0

    Posted October 10th, 2004 17:00

    Sorry, but my original post was about installing a new driver prior to SP2. (I tried to edit, but it got lost). The instructions say  a new 9800 driver needs to be installed.  Since I have 9700 does that mean it's not about me, or do  I still need to update to 9800  driver?  Also, I "clean" my driver out,  will I still have a video screen when I boot up again?  Sorry I've never messed much with drivers.
  • Thirdrockfromsu1

    1 Rookie

    •

    366 Posts

    449

    0

    Posted October 10th, 2004 17:00

    After you install the new video card driver, and reboot, you will have to go into display properties to adjust the monitor resolutions to get the monitor the way you like it.  Don't know if you have done this before.  But you right click on an empty space on your desktop, click on PROPERTIES/ click on SETTINGS in the upper right hand side of this box, look at the screen resolutions in the next box and slide the resolutions bar to where your monitor default setting should be.  Mind is set at the default of 1280x1024 ( LCD monitor ).  Yours might be different.  Than click on APPLY at the lower right hand side of this box.  Another box will appear and ask you if you want to keep this setting.  You only have a few seconds to make up your mind so click yes right away.