UNSOLVED

ebsny

updated

24 years ago

E

ebsny

3 Posts

0

6980

July 25th, 2002 03:00

Dimension 4100 to P4

Can I change the motherboard on my P3 933 Mhz to a P4 2.5 or so.....

Dimension P3 933Mhz, 256MB, 20 GB HD. WIN XP PRO

Eddie...

  • 284

    0

    Posted July 25th, 2002 03:00

    Unfortunately, you cannot. The system that you were shipped with DOES not and WILL NOT support a motherboard upgrade for a P4. In case you want a P4 system, you'll have to buy another computer, one that is custom built to take a P4 processor, one like the Dimension 4500 series systems. The P4 systems use a form factor that is not compatible with the systems that run P3.

  • Nhclass

    223 Posts

    284

    0

    Posted July 25th, 2002 04:00

    Any other options to improve performance?? Specs below

  • fredha

    1078 Posts

    284

    0

    Posted July 25th, 2002 08:00

    Add another 256MB of RAM. Go to www.crucial .com. Use their RAM specifier to get the proper RAM. It will cost about $50 and its easy to install. If you're a gamer a video card upgrade would help.

    Message Edited on 07/25/02 05:49AM by fredha
  • JnMHayes

    217 Posts

    284

    0

    Posted July 25th, 2002 11:00

    For what you would spend to upgrade your motherboard and CPU, you would be better off building your own system or buying a new Dell.

    HERE is an example of a high-end P4 system you could build for under $1000.