UNSOLVED

opoplawski

updated

24 years ago

0

22535

January 16th, 2003 12:00

Dimension 4100 does not boot from Windows XP CDROM

I'm trying to install WIndows XP on my Dimension 4100, but the CDROM will not boot - it apparently is not recognized as bootable.  I can boot other CDROMs in this machine, and the XP disk will boot in in another machine.

BIOS is A11, which I believe is the latest.

I'm stumped.

  • rickmktg

    2 Intern

    •

    11898 Posts

    482

    0

    Posted January 16th, 2003 12:00

    Is the drive setup as #1 to boot in the BIOS?

     

  • buffbison

    513 Posts

    482

    0

    Posted January 16th, 2003 13:00

    You should be able to bootup from the cd....just do what rick had said about checking to see if its first bootable device.....if its not, change it to the first bootable drive......  if somehow you still cannot bootup from the cd, you can download microsofts windows xp boot disk, which you will be saving onto six floppies and you will boot up from those..  heres the link, http://support.microsoft.com/default.aspx?scid=kb;en-us;310994
  • Denny Denham

    2 Intern

    •

    18798 Posts

    482

    0

    Posted January 16th, 2003 15:00

    opoplawski,

    Your computer is not booting from other CDs, it is autostarting, which is completely different. For instructions on how to set your CD-ROM as the first boot device, go here.

  • volcano11

    2 Intern

    •

    27973 Posts

    482

    0

    Posted January 17th, 2003 01:00

    Give us some examples of the other CDs that the computer is booting from.

    Steve

  • 482

    0

    Posted January 17th, 2003 01:00

    I'm not an idiot.  The computer IS booting from other CDs, just not this one.
  • msil217

    2 Intern

    •

    1997 Posts

    482

    0

    Posted January 17th, 2003 12:00

    Just Curious, Do you have GoBack? If so, try disabling it or uninstalling it. A long shot, but I can't repair Windows XP with GoBack enabled.
    Good Luck!!!
  • buffbison

    513 Posts

    482

    0

    Posted January 17th, 2003 12:00

    if some odd reason you cannot boot up from cd, then i guess the next best thing to do is to just use microsoft's xp boot floppies and once you have xp installed, then ya can try to get your computer to boot up on the cd.......  just go back to my previous message, http://forums.us.dell.com/supportforums/board/message?board.id=dim_other&message.id=140623 and just download the boot floppies.  remember, that you need 6 formatted floppies handy.
  • 482

    0

    Posted January 18th, 2003 02:00

    Other CDs that boot: SCO UnixWare 7.1.1, Debian Linux (Woody Netinst)

    Finally got XP installed with the boot floppies.  Thank you very much for that link!

    I have no idea what GoBack is, or why it would affect CD booting.

    CD still does not boot after the XP install (as expected really).

     

  • buffbison

    513 Posts

    482

    0

    Posted January 18th, 2003 03:00

    is the cd scratched??? maybe the file that allows the cd to boot could be caused by the area being scratched or finger prints.
  • 285

    0

    Posted January 18th, 2003 15:00

    Except that this CD boots in another computer!