
UNSOLVED
S
SierraBrad
2 Posts
0
1515
November 2nd, 2004 01:00
8400 Really Noisy Fan!
I just purchased the Dimension 8400. I like the computer but am having problems with fan noise. When sitting idle or doing normal browsing or most app's the fan is quiet.
I mainly purchased the PC for it's processing power. I am using the machine to encode AVI files to MPEG for DVD creation. During the encoding process the fans spins up and the noise is extremely loud...way above 60 decibels. It is intolerable. Most of the files that I encode take 4-5 hours to process and during that time the fan never quiets down.
I started testing the fan properties during other app's and found a couple of other interesting things. When I use PaintShop Pro 8, which was bundeled with the system, the same thing occurs during a cut and paste operation. I cut an image and while pasting, when it is a free floating image (while I'm deciding exactly where to paste it) the fan spins up and gets really really loud. The other time I noticed it was during a virus scan by Trend PCCillan 2005. As the program is scanning all files on my computer everything is fine until the program gets to a large file (like a CAB file). At that point the fan speeds up again to a point to where I'm sure if it wasn't firmly attached to the case it would fly away!
I have looked everywhere for a monitoring program included in the Dell tools and in the bios but can find nothing concerning the fan.
I have also done a little research and found that Dell is using fans by Delta (at least the one I have is a Delta) which by some people are considered to be the noisiest fans around. The fan specs are great though, moving between 50 and 60 cfm at 2800 rpm, which is great but with a db rating of around 34-36. That is one of the loudest ratings of fans that are out there. Still if my fan were around 35 db's then I would be happy but this one spins up to scary rev's....it is louder than a blow dryer and is comparable to my Kirby vacuum cleaner.
Hopefully I just have a bad fan but I am also wondering if I have a hot spot on the motherboard or a bad cpu. Any help about this would be greatly appreciated.
I have tried customer service. First by phone....to India I presume. The girl was rather nice but didn't know beans about the system or how to deal with fan noise. I would have rather talked to a real tech other than an answering service.
I also tried to contact customer support by email. Here again I ran into a problem. My service code doesn't work or my customer number or service code or order number. I was told by phone support (from India) that it takes Dell 15 days to include service codes and numbers to their online support center. Is this true? If you get a product and have problems out of the box you have to wait another two weeks to get help? The only option I had left was to use the service code from my other Dell Dimension 8250 (which is very quiet by the way and a great machine). But the warranty is over and I don't know if I'll get a response. Even though I used the old service code in the email I provided the new code and customer number within the email. It's been two days and no response. Hopefully they will email and not call because I'm sure I have irreversible hearing damage.
Any help would be appreciated.
Responses (4)
Solutions (0)
I just had my fan replaced in my three week old 8400. It is still loud. I mean LOUD. It wakes me up at night. Even though the PC is not doing anything, it just revs up to a point where it could take off.
I'm going to keep bothering tech support until this is resolved.
captkirk957
1 Message
136
0
Posted December 7th, 2004 16:00
I got my 8400 at the end of October, and it has had the problem with the fan running too fast. When we first unpacked it and turned it on, after about 15 minutes the fan began to gradually accelerate until it was literally blowing papers off the desk, and there was no program running. The first service call replaced the fan, but the fan problem resumed just after the technician left. The second service call replaced both the fan and the motherboard, but this time the technician observed that the problem was still there. Today he returned for a third time, and replaced the CPU chip, and again changed out the fan, and finally I have a quiet PC.
Kirk Hampton,
Fort Worth, TX
SierraBrad
2 Posts
136
0
Posted December 7th, 2004 22:00
Hi All,
Well, I wanted everyone to know what the final results were on fixing the noisy fan problem. I noticed one memeber actually had a motherboard replaced and that fixed it. But for me the fix finally came in a strange way. I contacted support and they sent me a replacement fan which didn't solve the problem. At that point I thought I really had a "heating up problem" so I checked the heatsink mount to the CPU which was fine. After I re-assembled the unit I rebooted and immediately got a memory failure. I removed each of the RAM memory sticks and discovered one of them was bad. The other one was fine. I contacted support again and they sent me two memory sticks (actually they wern't new but refurbished, just new to me). After replacing the memory chips everything quieted down and has been running flawlessly ever since.
My advice....check your RAM.

rdaxx
117 Posts
136
0
Posted November 2nd, 2004 04:00