UNSOLVED

mce2005

updated

22 years ago

M

mce2005

13 Posts

0

5330

April 18th, 2005 19:00

8400 and 0x0000007E blue screen error - please help

I am having serious problem with my relatively new (3 months old) PC. Any help/suggestion is greatly apprecited.
 
To start with, about 2 weeks back I got blue screen stop error and that time I didn't note that number. When I re-started everything worked until I tried to install Easy CD creator one week back. At the end of installation, it prompts me to re-start the PC which I did. But that re-start ends with blue screen 0x0000007E stop error. I couldn't even get into Safe mode. It wouldn't get into Window by any means.
 
I called Dell technical support and they send me re-installation disks and I did re-install the PC. Then everything started working fine for 5 days. Then I decided try installing EZ CD creator and I ended up having 0x0000007E blue screen stop error again. Some times when I tried re-boots, I get Mountmgr.sys on second line just after 0x0000007E error line.
 
From this description it may sound like the culprit is EZ CD creator. But, I doubt it. Reason being, my friend and myself we ordered same configuration Dimension 8400 and he installed EZ CD on his machine and it works fine without any issues.
 
When I ran Dell utility just after Dell BIOS, it wouldn't complete first hard drive read test completely. First time it terminates at 16% and went back to start. Second time at 13%, 3rd time 12% and 4th time 13%. At that point of time I cancelled the utility.
 
Also, when I checked the BIOS,  HT (Hyper threading) was set to off. So, I tried applying factory defalut. But, even after that, it still shows HT off. I didn't get time to check other setting in BIOS. But, I know for sure HT was on when I checked the BIOS few weeks earlier. I upgraded BIOS to A05 when it was made available on the first day.
 
Can some one help me on understanding what is issue with my PC and any suggestions?. Sorry about this long message.
PC Config:
P4 3.4 GHz
320 SATA RAID 0 drives (160X2)
1G memory
256MB Nvidia 6800
A05 Dell BIOS.
Logitech cordless optical keyboard/mouse
ATI thearterix 550 TV tuner card
 
Thanks for your time.
 
 
EDIT : Forgot to mention it runs on MCE2005.

Message Edited by mce2005 on 04-18-2005 03:11 PM

Message Edited by mce2005 on 04-18-2005 03:23 PM

  • RoHe

    12 Elder

    •

    45230 Posts

    •

    172625 Points

    74

    0

    Posted April 18th, 2005 23:00

    Not sure about your stop error, but sounds like you may have bad hard drive if the test doesn't complete. If you can boot from XP CD (tell Dell to send one if it didn't come with your system), run the Recovery Console. At C:\ prompt type:
    chkdsk C: /P /R

    Maybe that will fix the error, otherwise you may need new HD.

    Factory BIOS setting for hyperthreading is OFF so that's why it's still off after resetting to default.

    Ron