EricTan

updated

7 years ago

E

EricTan

2 Posts

1

14494

June 24th, 2019 15:00

Lattitude E5570 Bios Issue after update to 1.20.4

Here's a quick spec of my laptop
Intel i5-6440HQ, 8gigs of RAM running on Win10 Pro

Here's the timeline of my concern.

June 14, 2019 I have replaced my HDD to SDD using m.2 2280 (240gig WD-Green Brand)
June 16, 2019 I have replaced my Battery

June 21, 2019 I downloaded the Support Assist and updated the BIOS (As recommended)

After which I have been having issues with the screen, the screen turns black, I have to close the lid and open it again so I can continue working, this happens when the power cable is not plugged in.

Here's the steps I did (Troubleshooting)

1. Remove the SSD and use my old HDD

2. Use the old battery instead of the new battery

3. Restore from previous known settings (System Restore)

4. Download update using Dell Support Assist

All these troubleshooting done, I still have issues with the screen, It only works if I have the power cable plugged in but once I remove the power line, the screen goes black righ away, I have to close the LID so I can continue what I am doing.

I hope your team (Dell Tech Support) and this community can help me resolve this issue.

  • EricTan

    2 Posts

    12381

    2

    Posted June 30th, 2019 16:00

    Hello Allan, Thanks for your feedback a) Do you use the system with a docking station at all or is the laptop used standalone? - I don't use a docking station b) Are you running the latest drivers on the system in addition to the latest BIOS? - I'm running the latest BIOS as recommended by Support Assist, this where my problem starts, after I updated my BIOS. c) What version of Windows are you running? Running on Windows 10 PRO ver 1903 OS Build 18362.175 d) Can you boot the system into the BIOS please and then disconnect the ac adaptor - does the system lose video now? (To access the BIOS, power on the system and keep tapping the F2 key repeatedly in rapid succession) - yes, I can go to BIOS without the Ac adaptor connected and the screen is still on. e) Can you repeat the same steps but during the ePSA - does the system lose video in the ePSA? (To run the ePSA hold down the Fn key and power on the system) - f) Is the system going to sleep when you disconnect the ac adaptor or is it just losing video? - It just losses the video, it goes to black screen g) Can you have the laptop powered off and then disconnect the ac adaptor - if you power system on using just battery power does the lcd display video? - if the Ac adaptor is connected there are no problem with the lcd display h) If you downgrade the BIOS as per @Emptiness does that also resolve the issue for you? - I have not attempt to downgrade the BIOS because I dont know how hahaha UPDATE: I sent an email to Dell Tech support regarding my concern and the representative gave me an idea that it could be a software/driver concern for the video, so I start messing with the intel graphic settings, inside the setting/control panel, the are option under POWER, I tried to disable the on of the setting "Panel Self-Refresh". After doing this, it resolved my problem with the screen. I can now use my laptop on battery mode. :) Thanks again for your assistance.
  • Dell-Alan D

    4 Apprentice

    •

    1159 Posts

    12751

    4

    Posted July 1st, 2019 03:00


    @EricTan wrote:
    Hello Allan, Thanks for your feedback a) Do you use the system with a docking station at all or is the laptop used standalone? - I don't use a docking station b) Are you running the latest drivers on the system in addition to the latest BIOS? - I'm running the latest BIOS as recommended by Support Assist, this where my problem starts, after I updated my BIOS. c) What version of Windows are you running? Running on Windows 10 PRO ver 1903 OS Build 18362.175 d) Can you boot the system into the BIOS please and then disconnect the ac adaptor - does the system lose video now? (To access the BIOS, power on the system and keep tapping the F2 key repeatedly in rapid succession) - yes, I can go to BIOS without the Ac adaptor connected and the screen is still on. e) Can you repeat the same steps but during the ePSA - does the system lose video in the ePSA? (To run the ePSA hold down the Fn key and power on the system) - f) Is the system going to sleep when you disconnect the ac adaptor or is it just losing video? - It just losses the video, it goes to black screen g) Can you have the laptop powered off and then disconnect the ac adaptor - if you power system on using just battery power does the lcd display video? - if the Ac adaptor is connected there are no problem with the lcd display h) If you downgrade the BIOS as per @Emptiness does that also resolve the issue for you? - I have not attempt to downgrade the BIOS because I dont know how hahaha UPDATE: I sent an email to Dell Tech support regarding my concern and the representative gave me an idea that it could be a software/driver concern for the video, so I start messing with the intel graphic settings, inside the setting/control panel, the are option under POWER, I tried to disable the on of the setting "Panel Self-Refresh". After doing this, it resolved my problem with the screen. I can now use my laptop on battery mode. :) Thanks again for your assistance.

    @EricTan that's interesting to hear that panel self refresh resolved the issue for you. I thought that feature was removed from the graphics driver with BIOS updates. I have had that feedback from multiple users across various Latitude platforms. I'll keep that in mind for other users encountering similar symptoms.

    Alan

  • Dell-Alan D

    4 Apprentice

    •

    1159 Posts

    12221

    0

    Posted October 11th, 2019 03:00

    @Oscar1119 it should look like this image.png

    Depending on driver and/or BIOS revision, these options may not show for you.

    Alan 

  • Emptiness

    1 Message

    12431

    0

    Posted June 27th, 2019 23:00

    Exactly same issue with the screen as you described. No hardware changes here, no 3rd party drivers installed. On A/C-adapter screen is working fine, but as soon as I unplug, after a few seconds, the screen dies. I downgraded the BIOS to the previous version and no problems. DELL, this is a bug, please fix it!
  • Dell-Alan D

    4 Apprentice

    •

    1159 Posts

    12418

    0

    Posted June 28th, 2019 03:00


    @EricTan wrote:

    Here's a quick spec of my laptop
    Intel i5-6440HQ, 8gigs of RAM running on Win10 Pro

    Here's the timeline of my concern.

    June 14, 2019 I have replaced my HDD to SDD using m.2 2280 (240gig WD-Green Brand)
    June 16, 2019 I have replaced my Battery

    June 21, 2019 I downloaded the Support Assist and updated the BIOS (As recommended)

    After which I have been having issues with the screen, the screen turns black, I have to close the lid and open it again so I can continue working, this happens when the power cable is not plugged in.

    Here's the steps I did (Troubleshooting)

    1. Remove the SSD and use my old HDD

    2. Use the old battery instead of the new battery

    3. Restore from previous known settings (System Restore)

    4. Download update using Dell Support Assist

    All these troubleshooting done, I still have issues with the screen, It only works if I have the power cable plugged in but once I remove the power line, the screen goes black righ away, I have to close the LID so I can continue what I am doing.

    I hope your team (Dell Tech Support) and this community can help me resolve this issue.


    @EricTan that's very strange behaviour for the system to be exhibiting. Can you help me out with some additional details please

    a) Do you use the system with a docking station at all or is the laptop used standalone?
    b) Are you running the latest drivers on the system in addition to the latest BIOS?
    c) What version of Windows are you running?
    d) Can you boot the system into the BIOS please and then disconnect the ac adaptor - does the system lose video now? (To access the BIOS, power on the system and keep tapping the F2 key repeatedly in rapid succession)
    e) Can you repeat the same steps but during the ePSA - does the system lose video in the ePSA? (To run the ePSA hold down the Fn key and power on the system)
    f) Is the system going to sleep when you disconnect the ac adaptor or is it just losing video?
    g) Can you have the laptop powered off and then disconnect the ac adaptor - if you power system on using just battery power does the lcd display video?
    h) If you downgrade the BIOS as per @Emptiness does that also resolve the issue for you?

    Alan

  • 12498

    0

    Posted August 7th, 2019 07:00

    +1 disabling the Panel Self Refresh - this fixed my black screen issue with the 1.20.4 bios too

  • boosterpl

    3 Posts

    12311

    0

    Posted August 19th, 2019 14:00

    I have the same problem. Black screen after Windows logo appear and when i son battery. I have newest bios. Big bug!!!
  • Dell-Alan D

    4 Apprentice

    •

    1159 Posts

    12238

    0

    Posted August 21st, 2019 03:00

    @boosterpl does this issue only occur when running on battery or does it POST fine when the ac adaptor is connected?

    I would suggest trying the dell BIOS recovery method as outlined in this article - https://www.dell.com/support/article/us/en/04/sln300716/bios-recovery-options-on-a-dell-pc-or-tablet?lang=en

    Alan

  • 11954

    0

    Posted September 5th, 2019 03:00

    same here I had the issue with blackscreen on E5470 when on battery, disabling panel self refresh as pointed out on these forums fixed it for me.(wasted a lot of time rebuilding and trying lots of drivers etc) Surprised bug hasnt been fixed already!

  • CDUCC

    11 Posts

    11873

    0

    Posted September 9th, 2019 19:00

    Ditto! I also wasted a LOT of time trying to figure out why the screen kept going black when on battery. Disabling the Panel Self-Refresh fixed it.