Latitude 7200 2-in-1 second ssd (instead of wwan module)
Hi there!
I am a newbie here & i need help.
. I have recently tried to replace my wwan card module with second ssd module in my Dell Latitude 7200 2-in-1.
Ive purchased Western Digital M.2 NVME PCIe3.0x2 ssd (model SDAPTUW-512G-1012) to that end: https://imgbox.com/OBrpESR6
It have the following characteristics: interface: M.2 NVME PCIe3.0x2, form factor – M.2 2230 S3-B-M.
And as it claimed by the manufacturer, it works with Any Dell/HP/Lenovo laptops that use 2230 PCIe NVMe drives. On the other hand at screenshot below we can see the technical stamped mark «SSD 2230» near the wwan module zone. It leaves no doubt, that such a replacement provides manufacturer by itself. That’s why Ive installed it into my Dell Latitude 7200 2-in-1: https://imgbox.com/tUV8Q8uB
But it doesn’t working at all! Despite any BIOS changes and so on…
Thank you for sharing the details. As per your product details, we see that you are a Federal customer. Unfortunately, due to Federal contractual requirements Social team will be unable to assist you. Please contact the Federal Support team on 1-800-822-8965.
And please, dont tell me, that its technically impossible to make the empty WWAN slot to take the second SSD! AND WHY THEN ITS MARKED «SSD 2230» near the wwan module zone?
I have a 5290 2 in 1, intalled 2 ssds, M2.2280 1TB on the main slot, M2. 2230 512GB (SN520) on the second slot, works perfectly. I'll share the BIOS specs later
DELL-Cares
Moderator
•
27843 Posts
•
745 Points
2123
0
Posted December 25th, 2021 04:00
#IWork4Dell
For all non-technical issues that require your private data, we must communicate via a private Direct Message
Dell Partner GEM Program, Out of Warranty Support options, No free goodwill repair, Get a copy of your Dell invoice