
UNSOLVED
Closed
new ssd won't boot windows 10
I just purchased Dell 7773 laptop windows 10 with 2tb HDD and decided to get an SSD to install and use as my operating system drive shortly after. I purchased WD 250gb m2 PCIe nvme and installed in m2 slot. used macrium reflect to clone drive to the ssd. I did not immediately remove existing HDD. I thought I would be able to change settings to boot from SSD then once I was sure that was working, clean the HDD to use as storage. When I could not get it to boot from SSD, I tried removing HDD and it would not boot at all. ssd shows up in windows 10 as drive D, and shows in bios, but I cannot change any boot sequence as instructions I find don't look like what i'm seeing. I've searched all over and items I find do not help. Can someone point me in the right direction?
Thanks for any help.
This conversation is no longer open for comments or replies and is no longer visible to community members.
Responses (2)
Solutions (0)
- so you are saying to make fresh installation of windows 10 onto ssd after disconnecting hdd? don't clone at all?then after it's all set up and working propery with ssd as OS boot drive, do not install hdd internally - use cable as https://www.walmart.com/ip/StarTech-USB-3-0-to-2-5-SATA-III-Hard-Drive-Adapter-Cable-with-UASP/35118076to connect to usb and format drive that way?if so, i'll get cable and try it

Sankeerthan
4 Posts
2770
0
Posted September 1st, 2018 10:00
Exactly the problem happened to me. First do not migrate the OS directly from HDD. Please make a recovery of OS in a USB flash drive(refer any video tutorial of recovery through USB in you tube).Now remove the HDD connection and install the OS into SSD. Now if you connect the HDD your system will boot through HDD but not SSD. SO a cable will be available to connect the HDD externally to PC or laptop. Using that cable connect externally and format the HDD.Now reinstall the HDD and u can use it for data.Make sure the original cable of HDD is not at all exposed to dust.If it is so it will not detect HDD. in that case clean the cable with screen cleaning liquid,let it dry for a while and then you install the HDD. You will not be able to format HDD with OS internally.MUST CONNECT EXTERNALLY THOUGH CABLE.