
UNSOLVED
HA Agent has an error
Hi all,
I'm trying to configure 2x2950 and an MD3000i over iSCSI on a cluster, after I add the hosts to the cluster I configure the network part and enable HA; at the end on one of the host HA is disable and on the second I get that HA agent has an error. As soon as I have configured only the network part on the hosts from VI client I suspect that the problem is from this configuration which look like this:
host1: vSwitch0- Service Console (10.58.240.21); here I'll add also VMachinenetwork. (NIC0 and NIC3)
vSwitch1-iSCSI Service Console1(192.168.10.10) and iSCSI VMKernel1(192.168.10.11) - NIC1
vSwitch2-iSCSI Service Console2(192.168.20.10) and iSCSI VMKernel1(192.168.20.11) - NIC2
On MD3000i iSCSi ports are configured as follow:
iSCSI Cont 0, In0: 192.168.10.1
iSCSI Cont 0, In1: 192.168.20.1
iSCSI Cont 1, In0: 192.168.10.2
iSCSI Cont 0, In1: 192.168.20.2
Cable connections are like this:
NIC1 with iSCSI Cont 0, In0: 192.168.10.1
NIC2 with iSCSI Cont 1, In0: 192.168.10.2
When I try to ping from the host to iSCSI ports of the MD I get response only from 192.168.10.1 but not from 192.168.10.2.
I'm trying to configure 2x2950 and an MD3000i over iSCSI on a cluster, after I add the hosts to the cluster I configure the network part and enable HA; at the end on one of the host HA is disable and on the second I get that HA agent has an error. As soon as I have configured only the network part on the hosts from VI client I suspect that the problem is from this configuration which look like this:
host1: vSwitch0- Service Console (10.58.240.21); here I'll add also VMachinenetwork. (NIC0 and NIC3)
vSwitch1-iSCSI Service Console1(192.168.10.10) and iSCSI VMKernel1(192.168.10.11) - NIC1
vSwitch2-iSCSI Service Console2(192.168.20.10) and iSCSI VMKernel1(192.168.20.11) - NIC2
On MD3000i iSCSi ports are configured as follow:
iSCSI Cont 0, In0: 192.168.10.1
iSCSI Cont 0, In1: 192.168.20.1
iSCSI Cont 1, In0: 192.168.10.2
iSCSI Cont 0, In1: 192.168.20.2
Cable connections are like this:
NIC1 with iSCSI Cont 0, In0: 192.168.10.1
NIC2 with iSCSI Cont 1, In0: 192.168.10.2
When I try to ping from the host to iSCSI ports of the MD I get response only from 192.168.10.1 but not from 192.168.10.2.
Responses (0)
Solutions (0)
