We have a really strange problem in our hands. In our PS4100x, after a SMART error happened in one of the drives in our RAID array (Disk#17), and we are constantly getting "A copy-to-spare request is being denied for drive 17 because the drive is not part of a RAID set". Drive 17 is part of the same RAID set the spare (Disk#14) is, which is online and recognized as a spare (I even tried clearing the labels, and the CLI told me it was already a part of it, and GUI confirms it by being that option greyed out). Both drives are EQL specific drives. Any thoughts on what I can do next? Maybe try a hot swap of the affected drive or the spare with a EQL drive?
Hey, Thanks for the reply. It is running FW version 8.1.10 (R436828), RAID is 50 Is it safe to hot swap or should I turn everything down and then swap it? I am afraid of the data loss for a possible hot swap but the rebuild downtime also worries me - some data here are vital (we would be swapping soon)
Yes, it is safe to hot swap drives. You only have to remove the failing drive to force a rebuild. You don't actually have to swap their positions.
Please copy and paste the output of this command. GrpName>support exec "raidtool"
With RAID50 there should be two spares.
The clear label is only useful when you install a drive that was once part of another RAIDset. The labels can't be mixed. I.e.a drive from another EQL array was installed, and the old array wasn't reset first.
dwilliam62
6 Operator
•
1516 Posts
•
6374 Points
713
1
Posted October 18th, 2021 13:00
Hello,
What EQL FW is that array running? I suspect an older version. What RAID level? I'm guessing RAID5 or RAID6? What size drives?
If it is older firmware and the failing drive is #17, I would suggest pulling out that drive and forcing a rebuild vs. copy-to-spare
Regards,
Don