
UNSOLVED
Dell SCV3020: Change HBA from SAS to Fiber Chanel
Hi all,
I bought a used Dell SCV3020 storage system which is currently equipped with mini SAS connectors (cards: ASA-80165H/DELL) but which I don't see in the hardware inventory from iDRAC.
I'd like to convert it to a system with 16 Gigabit/s Fibre Channel connectors.
I've located the DELL QLogic QLE2662 Fibre Channel cards.
According to the compatibility chart (found here: https://dl.dell.com/content/manual51684295-dell-emc-storage-compatibility-matrix-for-sc-ps-and-fs-series-arrays.pdf) they are apparently compatible with my SCV3020.
I've found the method for removing the ASA-80165H cards: easy
Information: I'll do a reset to factory settings on the complete machine.
My question:
Will I have to do anything other than replace the cards to get it to work?
Thanks in advance, folks.
Responses (4)
Solutions (0)


Origin3k
6 Operator
•
2424 Posts
•
12408 Points
1
0
Posted July 5th, 2025 10:23
I have convert a couple of 5020 with SAS to 10G by replacing the Mezz board. Within DSM there is a HW replace option.
The 3020 also have a addional PCIe slot.... you should go this route. Speaken about 10G iSCSI compellent does not support Broadcom/Intel instead they use Chelsy(cant remember) or so. So the question is which maker of FC Cards they use.
I dont perform a factory reset/purge because i dont want to mess around with the license which is needed.
Regards,
Joerg
(edited)