I want to setup ITA to monitor my CX500. I have everything setup and working, except I can't figure out how to enable SNMP on the CX500. Anyone know how to do this?
You can use the same process as email home to have the array send an SNMP trap. It's on one of the other tabs in the template.
I don't believe ITA is a supported SNMP trap destination though. I think EMC has only validated 3 of the very major snmp applications (CA Unicenter, HP Openview and Tivoli Netview).
Log into Powerlink and do a search at the top for "clariion snmp support" (w/o the quote marks). There's a white paper on how to manage a clariion array with snmp.
Dev Mgr
6 Operator
•
9308 Posts
•
3 Points
259
0
Posted October 4th, 2007 01:00
I don't believe ITA is a supported SNMP trap destination though. I think EMC has only validated 3 of the very major snmp applications (CA Unicenter, HP Openview and Tivoli Netview).
Log into Powerlink and do a search at the top for "clariion snmp support" (w/o the quote marks). There's a white paper on how to manage a clariion array with snmp.