Use the Troubleshooting tool that it.

I found the tool.  Looks like it connects fine via WSMAN.

Protocols Selected are:

1. WSMAN

Top

How do I do that.

Hi,

Thanks for the post. Can you please check whether are you able to connect using Trouble Shooting tool ?

If you are able to connect, then please check whether VRTX certificate is valid (not-expired).

Thanks,

Arun

You might go to the IP address of the chassis (chassis GUI) and the ip of the servers (idrac GUI) and check to see if the certs are expired.  I think you click on the cert details in the GUI.

Thanks,

Rob

This is the cert I get when I go to the website of the VRTX chasis management controller.  I will say everything worked fine until I upgraded to 2.1, not sure if 2.01 did not care that the cert was expired?

Issued to:  cmc-30855

Issued by:  cmc-30855

Valid from 8/3/2001 to 8/1/2011

OME 2.1 updated the WS-MAN communication component. The newer component enforces better security policies and does not communicate with the devices if the certificates are expired.

You can update the certificate as follows:

Open CMC command line console ( SSH or Telnet ) and execute below RACADM command , this will reset the certificate to future date and resolves the issue.

$ racadm sslresetcfg

You will see the following output for the command:

Certificate regenerated successfully and webserver will be restarted

Regards

Abhijit

That worked.  Thank you.