UNSOLVED

Grime121

updated

6 years ago

G

Grime121

1 Rookie

•

23 Posts

1

3178

October 2nd, 2019 10:00

Logins Hang Every Other Day

It seems like just about every other day when I try to log into OME (3.2.1.29), the login just hangs. I type in my creds, click the button to log in, and the three little blue dots start flashing across the screen. It never gets past that. I have to go into the VM console, and restart the services to get the thing working again. It doesn't matter if I use AD creds or local creds. There is nothing in the audit log that even shows a login attempt was made either. This is getting to be VERY annoying.....

  • Daniel My

    12 Elder

    •

    6204 Posts

    2601

    0

    Posted October 3rd, 2019 09:00

    Hello

    I haven't experienced this. It sounds like a browser or network issue. I would make sure you are using a supported browser and perform network tests between your computer and the appliance to check for packet loss or other issues.

    If you are able to track down something that may be a bug then please post as much information as you can to reproduce it.

    Thanks

  • Grime121

    1 Rookie

    •

    23 Posts

    2546

    0

    Posted October 7th, 2019 09:00

    It happens regardless of the browser I am using, and I can guarantee there isn't a network issue. I'm on the same vLAN and switch. If it was a network issue, restarting the services wouldn't help.

  • ChristianWittmann

    1 Rookie

    •

    9 Posts

    2495

    0

    Posted October 10th, 2019 00:00

    I have the same Version/Build and the same situation.

    My logon account is a directory type AD. This Problem started with the upgrade to this version.

  • 2067

    0

    Posted May 6th, 2020 03:00

    This past weekend, I built a fresh install of OME VMware appliance v3.3.1 (Build 12) and have almost the exact same issue.  The difference for me is that rebooting the OME VM and/or restarting all OME services via the text UI doesn't have any impact for being able to log on.  I have tried using different passwords (I'm only logging on with the local admin account, not AD), I've tried connecting from different subnets, etc.  I am using Windows 10 1909 (patched and up-to-date) and I'm having this issue with Chrome, Firefox and EDGE (Chromium).  I don't have any problems being able to log on to OME when I'm using IE 11 (so at least I can access OME when needed).  Otherwise, the other browsers mentioned will often just sit there and show the three dots flashing.  Chrome and EDGE (Chromium) seem to have better success at logging on to the OME interface versus using Firefox.  I've tried connecting using the NetBIOS name, FQDN and IP address, same results.  Seems like a bug.

    We also have a fairly new DELL OMIVV appliance deployed (local admin only) and on the same subnet as the OME appliance.  No problems at all when logging into it from any browser.

     

  • KuRoWald

    2 Posts

    1855

    0

    Posted June 29th, 2020 21:00

    We have the same issue after upgrading to 3.4.0 (build 55). It is no longer possible to login to the console with any other browser than IE11 and it doesn't matter what kind of account we are trying to use (local / AD). 

    What can i do to solve this? 

  • Grime121

    1 Rookie

    •

    23 Posts

    1850

    1

    Posted June 29th, 2020 21:00

    Unfortunately, despite several people posting that they have the same issue, we have yet to receive a useful response from Dell.

    However, I have discovered that this issue only happens for me when I attempt to edit our discovery jobs. For some reason, when I try to edit either of the discovery jobs (one is for iDRAC IPs, the other is for VMware Host IPs, about 700 in each discovery job), whenever I try to save my changes, the browser basically locks up. The changes are never saved, and I am never returned to the discovery jobs page. I have to close the tab in the browser. At that point, the entire appliance basically becomes non-responsive. I have to log into the appliance via the CLI, and restart the services before I can log back into it, and perform any other tasks. I’ve tried deleting and recreating the discovery jobs. When I do this, they do not lock up when making changes to them for perhaps a week, or so. Then, all of a sudden, the same thing begins happening again, every time I try to edit them. I have built, and rebuilt the appliance from scratch multiple times. Every time, the result is the same. A week or so after creating the iDRAC and VMware Discovery Jobs, I am no longer able to edit them, without the entire appliance becoming unusable, until I restart all of the services on it via the CLI.

  • DELL-Joey C

    Moderator

    •

    4170 Posts

    •

    20965 Points

    1839

    0

    Posted June 30th, 2020 00:00

    Hi @KuRoWald,

     

    As a workaround, when you are accessing to OME, remove the "login" string in the URL to show only : https:// /core/console/console.html#/ . Let me know if this works. 

     

     

    Hi @Grime121,

     

    The issue might not be related, but are you setting up the discovery job using multiple protocol for single device? 

    DELL-Joey C

    Social Media and Communities Professional

    Dell Technologies | Enterprise Support Services

    #IWork4Dell

    Did I answer your query? Please click on ‘Mark as Accepted Answer’ if I did. 

  • KuRoWald

    2 Posts

    1838

    0

    Posted June 30th, 2020 00:00

    Hi @DELL-Joey C ,

    thanks for your reply, this workaround works for me. For all others with this issue, I have to go to the login page and enter my credentials. Then the issue appears, no redirection to the console. So I have to manually delete the /login from the url to just show https://  FQDN>/core/console/console.html#/ and the console opens up like before. 

    Is this an issue Dell knows about and will it be fixed?

    Kindly,
    Kurt

  • DELL-Joey C

    Moderator

    •

    4170 Posts

    •

    20965 Points

    1836

    1

    Posted June 30th, 2020 01:00

    Hi @KuRoWald,

     

    There were reports on version below 3.4, but none on 3.4. Though, I'm gonna feed this back to the engineering for notes. Thanks for the update.

     

    Do let me know if you have any other questions. 

    DELL-Joey C

    Social Media and Communities Professional

    Dell Technologies | Enterprise Support Services

    #IWork4Dell

    Did I answer your query? Please click on ‘Mark as Accepted Answer’ if I did. 

  • ka3yal

    1 Message

    530

    0

    Posted September 9th, 2020 02:00

    The issue still exists in Version 3.4.1 (Build 24). Started after the upgrade from 3.2.

    Now the login works only in IE11 (both Chrome and Firefox stuck on login screen) and the interface feels very sluggish.