ITdcwroclaw

updated

4 months ago

I

ITdcwroclaw

1 Rookie

•

3 Posts

•

40 Points

0

278

June 26th, 2026 12:54

SCv2020 7.4.2 - Unable to create SSD Storage Type with two Dell PX05SRB192Y SSDs

Hello,

I'm trying to add an SSD tier to an existing Dell EMC SCv2020 running SCOS 7.4.2.103, but I'm not sure if I'm hitting a product limitation or if I'm missing a configuration step.

Current configuration

  • Storage Center: SCv2020
  • SCOS Version: 7.4.2.103
  • Existing storage consists only of 10K and 7K SAS drives.
  • I installed two genuine Dell PX05SRB192Y 1.92 TB SAS SSDs.

The SSDs are detected correctly by the Storage Center:

  • They appear as Read-Intensive SSD.
  • Both drives become Managed.
  • Status is Up and Healthy.
  • They are not configured as Spare.
  • Firmware and vendor information are displayed correctly.

What happens

A new Read-Intensive SSD Disk Folder is created automatically under Disks, however no corresponding Storage Type is created.

When I try to create a new volume using the SSD Disk Folder, the Storage Center returns the following error:

Failed to create Volume: Insufficient number of disks to prepare storage. The system contains (0) managed disks and (0) spare disks and requires a minimum of (6) managed and (1) spare disks.

The same behavior occurs in both:

  • Unisphere for SC Series
  • Dell Storage Manager Client

What I have already verified

  • Storage Center license is Licensed (Unlimited).
  • SSDs are recognized as Dell drives.
  • Both SSDs are managed and healthy.
  • No additional actions such as "Prepare Storage" or "Create Storage Device" are available in DSM.
  • Existing 10K and 7K Storage Types work normally.

My question

Is there a minimum number of SSDs required to create a new SSD Storage Type (or SSD Tier) on an SCv2020 running SCOS 7.4.2?

I found an older Dell Community discussion mentioning that older SCOS versions required 6 managed disks, and that newer releases reduced this requirement to 5 disks, but I could not find any official documentation confirming the current limitation.

Can an SSD tier be created with only two SSDs, or is five/six drives still the minimum requirement?

Thank you for any clarification.

  • Origin3k

    6 Operator

    •

    2424 Posts

    •

    12408 Points

    1

    0

    Posted June 29th, 2026 04:27

    For sure there is a mnimum disk requirement for ever new disk folder.

  • DELL-Sam L

    Community Manager

    •

    8150 Posts

    •

    34715 Points

    1

    0

    Posted July 7th, 2026 22:03

    Hello ITdcwroclaw,

    It is still 6 disk minimum.

  • ITdcwroclaw

    1 Rookie

    •

    3 Posts

    •

    40 Points

    1

    0

    Posted June 29th, 2026 07:29

    Thank you.

    Do you know what the minimum number is for SCOS 7.4.2?

    Is it still 6 managed disks, or was it reduced to 5 in later releases?

  • ITdcwroclaw

    1 Rookie

    •

    3 Posts

    •

    40 Points

    0

    0

    Posted July 13th, 2026 07:28

    Thanks everyone for the suggestions. We ended up adding five more identical SSDs to the Dell storage array, and after that we were able to create all the volumes without any issues.