The HP server can see the frame, the devices are seen ( the hardware paths are seen on the server) but it says UNCLAIMED in the ioscan. The device configurations are ok on the clarion side and zoning looks to be fine.
Dynamox maybe I'm wrong .. But I remember that the "unclaimed" state refers to a device correctly detected at the hardware level but that lacks the appropriate device-driver in the kernel ... I think that insf needs a device driver available before creating the special files since insf needs to know the major number of the device driver before creating the sf..
I would add more information to the existing problem: The HP server can see the devices assigned from CX-700 , recently new devices were assigned from CX-3-80 and the devices are in UNCLAIMED state.
Below are the details of HP server details:
HP Superdome / HP-UX 11.11 HBA that connect to clariion: /dev/td8 HBA model : A5158A h/w path : 0/0/12/0/0
/dev/td2 HBA model : A5158A h/w path : 0/0/14/0/0
Is there any setting or patch update we are missing here ???
You have to modify the ioinit startup file ... Not a trivial task ..
I've tryied a couple of time .. one I had luck .. forget the other
Usually there is no need to renumber ALL the controllers .. Usually you simply remove dead entries so that there is another "slot" for the next ioscan .. But usually you leave the old instances at their places .. But it's up to HP to decide what's best for you
If I do remember well you have to boot first in single user, dump the ioinit database to a file, modify the file (removing unwanted entries) and then boot again with the new ioinit.
we had this problem as well, over the years our HPUX superdome got connected to many arrays/FAs ..so one day we had to present another FA ..and it would not create any devices on that hardware path. HP support has a script that will delete dead hardware paths, i don't remember exactly but i think it re-numbered all hardware paths, so you might have to re-import your volume groups. It also required two reboots.
dynamox
11 Legend
•
20419 Posts
•
87439 Points
991
0
Posted September 20th, 2007 06:00