Help

Start a discussion

chrisp3

updated

18 years ago

Solved!

Go to Solution
C

chrisp3

111 Posts

0

449

November 12th, 2008 13:00

MirrorView different Fiber Drive Sizes

I have an existing Clariion CX380 with 300 gig 10k Fiber Drives.
I would like to Mirrorview the data to a secondary Clariion
but it has 400 gig 10k drives. I am running Mirrorview/S.
All the LUNs would match in size.

I would doubt it would be an issue but I thought I would make sure.

Thanks
Chris
  • D

    DGM3

    238 Posts

    185

    1

    Posted November 12th, 2008 19:00

    What matters is the size of the LUN(s) being replicated, not the capacity of the disk drives that the LUNs reside on. As long as (for example) both LUNs in the MirrorView relationship are 100GB in size, it does not matter if the primary LUN is built on 300GB drives while the secondary LUN is built on 400GB drives. Just make sure the LUNs themselves are the same exact size.

    Regards,
    DGM
  • A

    AmolMahajan

    108 Posts

    185

    0

    Posted November 12th, 2008 19:00

    Hi,

    I think it is going to work fine :-)


    Please have a look at --> emc106111

    Oops !!!
    I read your Qs incorrectly.
    Answer changed ;-)

    Message was edited by:
    Amol Mahajan

Dell Support Resources

Latest Solutions

View More