If your array is running release 24 and higher, you can run a Report from the Task bar on the left side of the Navisphere UI. Just follow the Wizard - select the report you want to run or run all reports to get an idea of what information is available - select the "Available Storage Report" for unused Raid Group capacity.
Or you can click on Tasks/Reporting/Generate Report from the top of the UI. These reports are only available from the Navisphere UI.
Just wondering if anyone knows how to have this report generated/saved through the CLI? I'd like to Cron something up and save the report off on a Linux server, then send it out via e-mail weekly.
Following Pavels question is there a CLI command/set of commands which could be useful to count different aspekts of capacity on a clariion (flare.26)
I need to figure out the total capacity on a clarrion - both RAW and Effective (=RAW - system disks, spares).
The free capacity in RAID groups and free physical disk capacity.
Also I need to determine the amount of space allocated to individual hosts.
The Clariion reports are very handy when you need these kind of informations maybe once a month...
I need to start storing the space information daily and possible have the output in xml format, which I could then use for a pearl input.
I basicaly need the same information that is presented in the following reports:
Available Storage Report,
LUN report,
Storage Group Report
I have found some useful commands:
getdisk -capacity -product -lun -RAW
getlun -type -rg -capacity
getrg -disk -lunlist -type -ucap -tcap
Above commands give me a lot of information that I need, but I still do not know what hosts are logged to my Clariion and how much space they are using.
Another question is: how do I find out using CLI how much capcaity is used for the system disks?
The first 5 disks are usually fully reserved for a clariion itself. Are these disks highlighted in anyway in the output of the getdisk command?
I would like to exclude them from the effective capacity in my reports.
The storagegroup -list switch will list the WWN of the HBA's attached to the Storage Group - for example the below output is from the storagegroup -list command - these are the HBA WWN number for each HBA that is assigned to the storage group and the LUNs assigned to the storage group.
Remember to review the Navisphere Command Line Interface (CLI) manual for a more detailed explanation of the different CLI commands and the switches for these commands:
Storage Group Name: xyzzy_test Sorage Group UID: B8:AA:A7:24:E8:50:DC:11:B7:9E:00:60:16:0F:A0:B7 HBA/SP Pairs:
HBA UID SP Name SPPort ------- ------- ------ 20:00:00:00:C9:61:11:6A:10:00:00:00:C9:61:11:6A SP A 0 20:00:00:00:C9:61:11:6A:10:00:00:00:C9:61:11:6A SP B 0 20:00:00:00:C9:61:13:D6:10:00:00:00:C9:61:13:D6 SP A 1 20:00:00:00:C9:61:13:D6:10:00:00:00:C9:61:13:D6 SP B 1 20:00:00:00:C9:61:11:6A:10:00:00:00:C9:61:11:6A SP A 2 20:00:00:00:C9:61:11:6A:10:00:00:00:C9:61:11:6A SP B 2 20:00:00:00:C9:61:13:D6:10:00:00:00:C9:61:13:D6 SP A 3 20:00:00:00:C9:61:13:D6:10:00:00:00:C9:61:13:D6 SP B 3
HLU/ALU Pairs:
HLU Number ALU Number ---------- ---------- 0 14 1 15 2 16 3 17 4 18
kelleg
6 Operator
•
4537 Posts
1546
0
Posted November 4th, 2008 13:00
Or you can click on Tasks/Reporting/Generate Report from the top of the UI. These reports are only available from the Navisphere UI.
glen