drozz

updated

19 years ago

D

drozz

77 Posts

0

1738

July 23rd, 2007 09:00

Get data from an IBM DS4800 to an EMC Clariion CX700

We have an IBM SAN and we are trying to come up with an effective strategy to get specific LUNs to our Clariion over dark fiber. Does any one have any good ideas?
  • ejk67

    8 Posts

    569

    0

    Posted March 15th, 2010 12:00

    My company went from IBM storage behind an SVC to CLARiiON storage. Here's the steps I followed.

    1. Installed Power Path, CLARiiON ODM definitions, Navisphere agent and inq on all my AIX hosts.

    2. Had SAN engineer zone in the server. We have dual HBA(s) in our servers so we took one HBA and zoned it to the CLARiiON. So two HBA(s) zoned to IBM and a single HBA zoned to CLARiiON.

    3. Presented EMC LUN to server. This required removing LUNZ on AIX and rescanning.

    4. Created volumes, logical volumes and the file system on the CLARiiON.

    5. Unmount and remounted original file system as read only after stopping application.

    5. Copied using the following method using an "at" job.

         cd /where_the_data_resides; find . -depth | cpio -pcvdum /CLARiiON_file_system/ > /tmp/cp.log 2>/tmp/err.log

    Note: it's important to capture the error log because certain files (like tar balls) won't copy over.

    6. Unmount old and new file systems and rename them. The old file system becomes something like filesystem_old and the new file system is renamed to whatever the application was using originally.

    I was able to do up to and including step 4 before having to take the system from the users.

  • dynamox

    11 Legend

    •

    20419 Posts

    •

    87439 Points

    478

    1

    Posted July 23rd, 2007 10:00

    i don't believe DS4800 is supported for SanCopy unless it's changed in the newest flare. I see the following IBM arrays listed as being supported:

    IBM DS: 4100,4300,4400,4500,8000
    IBM ESS: 800,E20,F20
    IBM FastT: 200,500,600,700,900
  • ZaphodB

    195 Posts

    476

    0

    Posted July 23rd, 2007 10:00

    You need to figure out your business needs and resource constraints. There are many options available which ar more or less appropriate depending on your specific needs:

    1) good old back up and restore

    2) SAN Copy from the original LUN, or from a Flash

    3) software mirror through the OS, then break the mirror

    ...
  • AranH1

    2163 Posts

    478

    0

    Posted July 23rd, 2007 12:00

    Since you mention dark fiber should we assume the CLARiiON is in a remote site?
    Is the CLARiiON already deployed and in use?
    If it is a remote site, what is the bandwidth to the remote site?
  • drozz

    77 Posts

    478

    0

    Posted July 23rd, 2007 13:00

    Yes It is in a remote site. I have a CX700 and the IBM 4800 here at the production site. I have a dark fiber run to a DR site with another CX700. Replication and cloning are running great on the Clariions but i need a solution for the IBM. I have about 3 TB that has to go to the DR site

    Message was edited by:
    drozz
  • drozz

    77 Posts

    478

    0

    Posted July 23rd, 2007 13:00

    This will be continuous replication. I did look at Recoverpoint and the cost is definitely a deterrent. I was looking for a software base or leveraging our existing SnapView/SAN Copy technology but can't find anything definitive. I'm trying to stay away from host based replication as I want to use my fiber and stay away from IP.

    Message was edited by:
    drozz
  • AranH1

    2163 Posts

    478

    1

    Posted July 23rd, 2007 13:00

    Is this a one time migration or a continuous replication for DR?

    If you are looking for continuous replication between different vendors then EMC RecoverPoint is an option. It will cost a bit but it will enable you to replicate LUNs between arrays of different vendors.

    The replication options are fabric based using Cisco FC switches, or host based using an agent on each server that requires replication of LUNs.
  • fullers1

    1 Rookie

    •

    19 Posts

    478

    0

    Posted July 24th, 2007 13:00

    I have an IBM Shark Model 800 and an EMC Clariion CX700. I migrated all of my Windows servers from the Shark to the Clariion. In my case, all servers were redundantly connected with two fiber cards through fiber switches. So I disconnected one card, uninstalled the IBM Subsystem Device Driver, connected the disconnected card to the Clariion via fiber switch, then copied all of the files from one SAN drive to the other. When I was finished copying, I disconnected the other fiber card from the Shark and connected it to the Clariion and installed Power Path. This is not an "elegant" solution but it works and doesn't cost anything extra. Obviously, I'm giving you the overview and leaving out details. I still have the documentation I created with step by step details and wouldn't mind sharing it with you if you're interested in pursuing this.
  • drozz

    77 Posts

    478

    0

    Posted July 24th, 2007 14:00

    Thanks Sean, but the IBM SAN is staying in production. I'm looking for a disaster recovery plan for the data. It looks like it might come down to a host based solution locally and then replication between the CXs here and the DR site
  • drozz

    77 Posts

    339

    0

    Posted July 30th, 2007 06:00

    I still haven't verified compatibility between the Arrays and any replication software so until I do, I will plan to use a host based solution to the CX700, then replicate the data over to our DR site.

    THANKS for the comments!