UNSOLVED

Jithu9288

updated

14 years ago

J

Jithu9288

1 Rookie

•

61 Posts

0

4856

July 4th, 2012 11:00

AIX server is throwing error.

Hi team,

recently our AIX team has recieved the below error and they wanted us to check that. Could anyone help me to understand this issue.

EMCP_BUS_DEAD

---------------------------------------------------------------------------

LABEL:          EMCP_BUS_DEAD

IDENTIFIER:     3767AAFF

Date/Time:       Wed Jul  4 16:00:15 GMT 2012

Sequence Number: 761

Machine Id:      000EA46AB400

Node Id:         norapdb01

Class:           H

Type:            INFO

WPAR:            Global

Resource Name:   unspecified    

Resource Class:  disk

Resource Type:  

Location:       

Description

BACK-UP PATH INOPERATIVE

Probable Causes

DISK

SCSI ADAPTER

SCSI CABLE

Failure Causes

DISK

SCSI ADAPTER

CABLE LOOSE OR DEFECTIVE

            Recommended Actions

            PERFORM PROBLEM DETERMINATION ON SCSI TARGET DEVICE

            PERFORM PROBLEM DETERMINATION ON HOST SCSI ADAPTER

                    REPLACE SCSI CABLE

Detail Data

RESOURCE NAME

  • dynamox

    11 Legend

    •

    20419 Posts

    •

    87439 Points

    1382

    0

    Posted July 4th, 2012 11:00

    ask them to give you output from "powermt display dev=all" as well as "lsdev -Cc disk"

  • AnkitMehta

    4 Apprentice

    •

    1365 Posts

    1382

    0

    Posted July 4th, 2012 11:00

    What is the multipathing software installed on the host? Is it powerpath?

    Can you check if the switch was swapped out?

  • Jithu9288

    1 Rookie

    •

    61 Posts

    1382

    0

    Posted July 4th, 2012 13:00

    thank you dynamox. could you tell me what exactly the Q-IOs error mean.

  • dynamox

    11 Legend

    •

    20419 Posts

    •

    87439 Points

    1382

    1

    Posted July 4th, 2012 13:00

    not a problem anymore but it does tell you that there were errors in the past. It could be anything, physical connectivity issues (HBA going bad, cable going bad, patch panel port going bad), to logical configuration issues (somebody removed a zone, disable the wrong port on the switch). At this point you don't have any dead paths so things are ok but keep watching the error count ..if it's increasing you will need to start troubleshooting different components.

  • Jithu9288

    1 Rookie

    •

    61 Posts

    1382

    0

    Posted July 4th, 2012 13:00

    lsdev -cc disk output:

    # Output Filename : lsdev_-Cc_disk.txt
    # Date : Wed Jul  4 17:44:21 GMT 2012
    ################################################

    hdisk0      Available C6-T1-01 EMC INVISTA FCP Disk
    hdisk1      Available C6-T1-01 EMC INVISTA FCP Disk
    hdisk2      Available C6-T1-01 EMC INVISTA FCP Disk
    hdisk3      Available C6-T1-01 EMC INVISTA FCP Disk
    hdisk4      Available C6-T1-01 EMC INVISTA FCP Disk
    hdisk5      Available C6-T1-01 EMC INVISTA FCP Disk
    hdisk6      Available C6-T1-01 EMC INVISTA FCP Disk
    hdisk7      Available C6-T1-01 EMC INVISTA FCP Disk
    hdisk8      Available C6-T1-01 EMC INVISTA FCP Disk
    hdisk9      Available C6-T1-01 EMC INVISTA FCP Disk
    hdisk10     Available C6-T1-01 EMC INVISTA FCP Disk
    hdisk11     Available C6-T1-01 EMC INVISTA FCP Disk
    hdisk12     Available C6-T1-01 EMC INVISTA FCP Disk
    hdisk13     Available C6-T1-01 EMC INVISTA FCP Disk
    hdisk14     Available C6-T1-01 EMC INVISTA FCP Disk
    hdisk15     Available C6-T1-01 EMC INVISTA FCP Disk
    hdisk16     Available C6-T1-01 EMC INVISTA FCP Disk
    hdisk17     Available C6-T1-01 EMC INVISTA FCP Disk
    hdisk18     Available C8-T1-01 EMC INVISTA FCP Disk
    hdisk19     Available C8-T1-01 EMC INVISTA FCP Disk
    hdisk20     Available C8-T1-01 EMC INVISTA FCP Disk
    hdisk21     Available C8-T1-01 EMC INVISTA FCP Disk
    hdisk22     Available C8-T1-01 EMC INVISTA FCP Disk
    hdisk23     Available C8-T1-01 EMC INVISTA FCP Disk
    hdisk24     Available C8-T1-01 EMC INVISTA FCP Disk
    hdisk25     Available C8-T1-01 EMC INVISTA FCP Disk
    hdisk26     Available C8-T1-01 EMC INVISTA FCP Disk
    hdisk27     Available C8-T1-01 EMC INVISTA FCP Disk
    hdisk28     Available C8-T1-01 EMC INVISTA FCP Disk
    hdisk29     Available C8-T1-01 EMC INVISTA FCP Disk
    hdisk30     Available C8-T1-01 EMC INVISTA FCP Disk
    hdisk31     Available C8-T1-01 EMC INVISTA FCP Disk
    hdisk32     Available C8-T1-01 EMC INVISTA FCP Disk
    hdisk33     Available C8-T1-01 EMC INVISTA FCP Disk
    hdisk34     Available C8-T1-01 EMC INVISTA FCP Disk
    hdisk35     Available C8-T1-01 EMC INVISTA FCP Disk
    hdisk36     Available C6-T1-01 EMC INVISTA FCP Disk
    hdisk37     Available C6-T1-01 EMC INVISTA FCP Disk
    hdisk38     Available C8-T1-01 EMC INVISTA FCP Disk
    hdisk39     Available C8-T1-01 EMC INVISTA FCP Disk
    hdiskpower0 Available C6-T1-01 PowerPath Device
    hdiskpower1 Available C6-T1-01 PowerPath Device
    hdiskpower2 Available C6-T1-01 PowerPath Device
    hdiskpower3 Available C6-T1-01 PowerPath Device
    hdiskpower4 Available C6-T1-01 PowerPath Device
    hdiskpower5 Available C6-T1-01 PowerPath Device
    hdiskpower6 Available C6-T1-01 PowerPath Device
    hdiskpower7 Available C6-T1-01 PowerPath Device
    hdiskpower8 Available C6-T1-01 PowerPath Device
    hdiskpower9 Available C6-T1-01 PowerPath Device

  • dynamox

    11 Legend

    •

    20419 Posts

    •

    87439 Points

    306

    0

    Posted July 4th, 2012 13:00

    those are not Q-IOs (queued io), that last column is errors (why your system admin complained in the first place)

  • Jithu9288

    1 Rookie

    •

    61 Posts

    306

    0

    Posted July 4th, 2012 13:00

    they have recieved an error "EMCP_BUS_DEAD" for this server and they suspect it is to do something with the devs.

  • dynamox

    11 Legend

    •

    20419 Posts

    •

    87439 Points

    794

    0

    Posted July 4th, 2012 13:00

    Jithu9288 wrote:

    will a powermt restore will reset the errors?

    yes

  • Jithu9288

    1 Rookie

    •

    61 Posts

    306

    0

    Posted July 4th, 2012 13:00

    Hi ankit, how should i check it?

  • Jithu9288

    1 Rookie

    •

    61 Posts

    306

    0

    Posted July 4th, 2012 13:00

    post 7.

    also pls check the Q-IOs listed in the powermt output and what exactly it mean? for two paths it shows 3 and 5 respectively. so there were a total of 8 IOs outstanding?