jimkunysz

updated

18 years ago

J

jimkunysz

2 Intern

•

259 Posts

0

817

April 6th, 2009 05:00

server_log debug level

we had an issue over the weekend with our celerra and the sac engineer bumped up the debug level on our celerra. I think he forgot to turn it down as I see much greater detail in the server_log log. I don't see the command in cmd_log log but perhaps someone here can provide the command to turn down the logging?

Thanks.

Jim
  • Diego_Nieva

    11 Posts

    339

    0

    Posted April 6th, 2009 10:00

    Jimbo;
    You won't find syslog command since it is a sintax for server_config command.

    it'll be:
    $> .server_config server_x "logsys set severity ="
    


    where server_x is the datamover name.

    Let me know if it helps.

    Message was edited by:
    diegonieva
     added
  • Diego_Nieva

    11 Posts

    339

    1

    Posted April 6th, 2009 06:00

    Hello Jimbo!

    According to Administration Guide here are the debugging levels:

    logsys set severity = Data Mover command.
     
    #define LOG_EMERG 0 /* system is unusable */
    #define LOG_ALERT 1 /* action must be taken immediately */
    #define LOG_CRIT 2 /* critical conditions */
    #define LOG_ERR 3 /* error conditions */
    #define LOG_WARNING 4 /* warning conditions */
    #define LOG_NOTICE 5 /* normal but signification condition */
    #define LOG_INFO 6 /* informational */
    #define LOG_DEBUG 7 /* debug-level messages */
    


    Taken from here:
    emc171030

    Hope it helps!

    Message was edited by:
    diegonieva (Adding the
     mod)
  • jimkunysz

    2 Intern

    •

    259 Posts

    339

    0

    Posted April 6th, 2009 07:00

    I can't find the logsys command. Thanks for the syntax - I'll review the admin guide.