I have a Cifsserver running on VDM and i have configured CEE on a windows server and when i try to start the VC service on Datamover it says the cifsserver name is invalid
Can anyone help us in this situation? Am i missing any configuration.
If you haven't done so, you should download and review the EMC document, "Using VNX Event Enabler".
When configuring VEE, you must create a CIFS server on the physical datamover (server_2) to use for the Virus Checking service. Per the documentation, you cannot use a CIFS server on a VDM for virus checking. The CIFS server on the physical doesn't need any storage attached or CIFS shares created, just an IP address.
I have configured one CIFSSERVER on VDM (the actual production) and another CIFSSERVER on Physical Data Mover which is just having an IP address as you told.
Below is the viruschecker.conf file what is the value i should enter for CIFSserver=? and msrpcuser=?
The CIFSserver entry should be the name of the CIFS server on the Physical Data Mover. The MSRPCUSER is the name of the domain user account used to communicate with the AV servers.
Problem is if i give irshad\emcadmin (the domain account communicating with the AV server) as the username in the above command it takes the username as irshademcadmin and when i start the service it says invalid username.
umichklewis
4 Apprentice
•
1190 Posts
802
0
Posted March 24th, 2015 09:00
If you haven't done so, you should download and review the EMC document, "Using VNX Event Enabler".
When configuring VEE, you must create a CIFS server on the physical datamover (server_2) to use for the Virus Checking service. Per the documentation, you cannot use a CIFS server on a VDM for virus checking. The CIFS server on the physical doesn't need any storage attached or CIFS shares created, just an IP address.
Let us know if that helps!
Karl