Hi, i have successfully tested a failover of a VDM and CIFS server using celerra replicator. The process mounted the CIFS server at DR with a different IP address that was updated in DNS so that clients accessing the share were directed automatically to the new IP address.
I would like to test a failover of the NFS share. This share currently has an IP address and the servers access this share by IP address. This IP address range is not available at the DR site. How will the NFS share become available at the DR site - as it will have a different IP address the servers would have to mount this share on the new IP address. Is this correct?
What is the best way to mount an NFS share at production so that when it fails over to DR it can be accessed? Is there a way i can do this without having to mount the share with a different IP address at DR?
Should the NFS share have a hostname associated with it and then the share should be accessed by servers using hostname?
Even if you use a VDM with a CIFS server and have that CIFS server change the IP address through dynamic DNS then existing NFS clients still have to unmount and re-mount.
For an existing NFS mount a NFS client never does a DNS lookup again – even if it would then still the MAC address and fsid of the DR servers would be different resulting in stale file handles.
NFS (and Unix clients) aren’t cluster-aware like CIFS.
A well behaved CIFS application (“Wolfpack aware”) will try to map a share again after its been disconnected (with the new IP if the server has changed it in DNS/NetBIOS/WINS… in the meantime)
I take from the response recieved that i can assign a host name to an NFS IP address and mount the host name. Wether or not i do this i must unmount and re-mount the NFS share.
The NFS client and server dont really care about names – they talk via IP addresses and the server doesn’t care which “name” the client maybe used
Sure you can mount using a hostname – but if you change that hostname – IP lookup result it is not going to effect any existing mounts – only new mounts
sebbyr
99 Posts
1252
1
Posted November 15th, 2010 06:00
The best way would be for the clients to mount the NFS exports via hostname. The DR side will need IPs that are accessible by the clients.
Thanks.
Sebby Robles
eServices
EMC Celerra Support