UNSOLVED

robertkalinowsk

updated

15 years ago

0

554

June 15th, 2011 06:00

Celerra Disk Configuration

I have four chassis available to be configured. Two chassis are fully populated with 450 GB, 15 Fibre disks and two chassis with 600 GB 15 K fibre disks. Can I create one large RAID 5 striped across all 60 disks? Can I mix and match different sizes of disks in single RAID group? Is this type of configuration supported?

  • dynamox

    11 Legend

    •

    20419 Posts

    •

    87439 Points

    332

    0

    Posted June 15th, 2011 07:00

  • dynamox

    11 Legend

    •

    20419 Posts

    •

    87439 Points

    332

    0

    Posted June 15th, 2011 07:00

    if you take  4 x 450G and 1 x 300G drive and create a raid-5 group, you will essentially get a raid group that consists of 5 x 300G worth of capacity. So yes you can ..but you waste tons of usable space.

  • 332

    0

    Posted June 15th, 2011 07:00

    The question is if two different sizes of  disks can coexist in a single RAID group?