Solved!
Go to SolutionMW
markus.wendler
1 Rookie
•
37 Posts
0
6560
November 7th, 2016 00:00
Avamar Virtual Edition with multiple networks
Hi,
I´m currently running an AVE with 7.3 in our lab environement for testing purposes.
We have some "official" network within the lab (let´s call it Network #1) and everything is running fine. Now we have an additional network limited to the ESX-Cluster (not routed outside) which is called Network #2. This one is configured on a seperate vSwitch.
Is it possible to just add another vNIC with Network #2 to the AVE-Appliance to get client-backups running over this subnet as well?
Thanks,
Markus
Is the Network #2 for VMware backup? The multiple networks are supported, but we need special configuration like VLAN. The probe.xml needs to be added with additional interface. I am not sure if there is a procedure published to customers.
--Beta
markus.wendler
1 Rookie
•
37 Posts
5013
0
Posted November 11th, 2016 00:00
Yep - Network #2 would be for backup purposes as we have a seperated, isolated Demo-Environment running in our vSphere. I´m a partner so also have access to the customer service procedures in SolVe - Even if I´m not really aware of any procedures in regards of probe.xml
But might be the case I have not payed enough attention to this ;-)
markus.wendler
1 Rookie
•
37 Posts
5013
0
Posted November 12th, 2016 09:00
mmh restarting gsan now hangs in "checking for server ready - please wait"... any ideas? :-)
markus.wendler
1 Rookie
•
37 Posts
5013
0
Posted November 18th, 2016 00:00
Hi,
seems that I had an issue with my AVE itself.... After doing a clean-install and adding your syntax to probe.xml it worked fine and as expected :-)
Thank you very much!
Zhou
1 Rookie
•
53 Posts
5013
0
Posted November 11th, 2016 17:00
You will need to add a new interface for the second network, then restart the gsan.
Then you need to map the hostname of Avamar to the second IP for the proxies.
--Beta