UNSOLVED

mathieup75

updated

3 months ago

M

mathieup75

1 Rookie

•

6 Posts

•

2 Points

0

276

October 11th, 2025 22:12

Aurora R16, Top Fan Error after upgrading GPU, but there are no top fans!

Hi,

I just updated the GPU in my Aurora R16.  Basically I swapped my RTX 4060 TI (8Gb) to a RTX 5070 (12 Gb).  After rebooting I got the Top Fan Error (1 and 2).  I DON'T HAVE Top Fans. 

I checked the other fans and they work fine.  I reset the BIOS, updated the BIOS and went over all menu option in both the BIOS and the Alienware Command Center and I can't get rid of the error.

The system works fine and I don't have any other issues.  But I have to acknowledge the error every time I boot.

Am I the only one with this issue?

<To protect you, your private information was removed from public view. All private data was saved to your private Case. DELL-Admin>

 

(edited)

  • redxps630

    11 Legend

    •

    16434 Posts

    •

    83185 Points

    0

    0

    Posted October 11th, 2025 22:55

    OP has air cooler for CPU

    MXY5H
    therefore no top 240mm AIO cooler and no top radiator fans.
    professor once said "Clear CMOS by holding in the power button for 30 seconds."
  • ProfessorW00d

    6 Operator

    •

    2378 Posts

    •

    10262 Points

    0

    0

    Posted October 12th, 2025 04:49

    Is it possible that it is coded into BIOS that if you have the RTX 5070 (or above) you must have a liquid cooled CPU???

  • Vanadiel

    8 Professor

    •

    7094 Posts

    •

    29695 Points

    0

    0

    Posted October 12th, 2025 16:58

    It's likely talking about the video card fans.

    If you use that diagnostic code you should be able to get some more information on what it means.

  • mathieup75

    1 Rookie

    •

    6 Posts

    •

    2 Points

    0

    0

    Posted October 12th, 2025 19:21

    @Vanadiel​ The error code is for system fans (not GPU) 2000-0511.

  • mathieup75

    1 Rookie

    •

    6 Posts

    •

    2 Points

    0

    0

    Posted October 12th, 2025 19:49

  • mathieup75

    1 Rookie

    •

    6 Posts

    •

    2 Points

    0

    0

    Posted October 12th, 2025 19:50

    @ProfessorW00d​ Maybe...

  • Vanadiel

    8 Professor

    •

    7094 Posts

    •

    29695 Points

    0

    0

    Posted October 12th, 2025 20:05

    @mathieup75​ Swap it back to the OEM, see if the issue goes away.

    That will avoid arriving at the wrong conclusion.

  • mathieup75

    1 Rookie

    •

    6 Posts

    •

    2 Points

    0

    0

    Posted October 12th, 2025 20:28

    @Vanadiel​ Good idea, sadly I already sold the previous GPU

  • dectric

    1 Rookie

    •

    1 Message

    •

    2 Points

    0

    0

    Posted February 9th, 2026 12:47

    I'm having this same issue... did you ever resolve it...

  • mathieup75

    1 Rookie

    •

    6 Posts

    •

    2 Points

    0

    0

    Posted February 9th, 2026 15:10

    @dectric​ sadly, no.  I just ignore the alarm at boot.