To which CSI driver Isilon/PowerScale version does this FAQ apply?
This FAQ applies to version 1.3 of the CSI Driver for Isilon/PowerScale available here : https://github.com/dell/csi-powerscale/tree/v1.3.0

What's new with version 1.3 ?

Supports Kubernetes version 1.17, 1.18, 1.19
Supports OpenShift 4.3 and 4.4 with both RHEL and RHCOS worker nodes
Supports Docker EE 3.1
Supports volume cloning
Supports CentOS versions 7.8, Red Hat Enterprise Linux 7.8
New installer scripts
New repo name https://github.com/dell/csi-powerscale/

Which CSI version does the driver conform to?
The driver works with upstream Kubernetes1.17, 1.18, 1.19 ; Openshift 4.3 and 4.4 and CSI specification 1.1 with the CSI interface enabled.
Additional Kubernetes versions and variants will be qualified over time.

What are the supported features?
The following table lists the supported action to manage the lifecycle of a Isilon/PowerScale volume managed with the CSI driver

Action	Supported (version)
Static Provisioning	yes
Dynamic Provisioning	yes
Binding	yes
Retain Reclaiming	yes
Delete Reclaiming	yes
Recycle Reclaiming	no
Expand Persistent Volume	yes
Shrink Persistent Volume	no
Create Snapshot Volume	yes
Create Volume from Snapshot	yes
Delete Snapshot	yes
CSI Volume Cloning	yes
CSI Raw Block Volume	no
CSI ephemeral volumes	no

Is it possible to create volume in different share ?
It is possible to create multiple or different StorageClass to access separate access zones.

What are the known limitations?
NFS is the only supported protocol.
One driver instance can manage one Isilon/PowerScale cluster only.
One driver instance can be installed on the Kubernetes cluster.

How do I set up the CSI driver?

How do I set up the Unity CSI driver?

The CSI driver can be installed with the provided installation scripts under the directory dell-csi-helm-installer or with the dell-csi-operator.

The operator is available directly from Openshift OperatorHub UI. For other distributions, you can download it from operatorhub.io.

For ease of installation, we recommend using the dell-csi-operator. If you want to have more control over the components helm is more open.

The details of each installation methods are documented in the product guide.

A video showing the Operator usage in context CSI Isilon is viewable here : (https://www.youtube.com/watch?v=l4z2tRqHnSg&list=PLbssOJyyvHuVXyKi0c9Z7NLqBiDiwF1eA&index=6)

How to install the beta snapshot capability?

With the promotion of Volume Snapshot to beta, one significant change is the CSI external-snapshotter sidecar has been split into two controllers, a common snapshot controller and a CSI external-snapshotter sidecar.

The provided install script will :

By default, install of the external-snaphotter for CSI Unity.
Optionally, install the beta snapshot CRD when the option --snapshot-crd is set during the initial installation.

It is up to your Kubernetes distribution or you to deploy the common snapshotter controller.

How to uninstall the CSI driver?
Like for the installation, you can uninstall the driver with helm :
helm delete ISILON_RELEASE [--purge]

Or execute the script:
sh csi-uninstall.sh

How to upgrade the CSI driver?

Previously, till version 1.2.0, the driver supported Kubernetes alpha Volume Snapshot. With the addition of support for beta snapshot, the Product Guide recommends to remove volume snapshots, volume snapshot content, and volume snapshot class objects before anything else. Nevertheless, the Kubernetes blog announcing the beta release explains how to manually import the snapshots. That procedure haven't been tested by Dell EMC so feel free to share your experience in the forum

If you come from an installation with helm v2. You have to uninstall then reinstall the driver with helm v3 :
* Uninstall the driver using the latest csi-uninstall.sh
* Install the driver using the latest csi-install.sh script and the new myvalues.yaml file

Because of the multi-array support the and the secret with the credentials are very different from previous versions ; make sure secret.json is valid.

The version 1.3 is the first to bring the operator support for multi-array. Make sure to use the latest version of dell-csi-operator, before proceeding to the installation.

Please read to the product guide before upgrading.

What are the pre-requisites for CSI driver installation?
To check your system complies with the pre-requisites, you can execute the script sh verify.sh

The detailed list of pre-requisites is available in the product guide

Which k8s distributions are supported?
The supported versions are upstream Kubernetes 1.17, 1.18, 1.19 ; OpenShift 4.3, 4.4 with RHEL or RHCOS nodes ; Docker EE v3.1

If you need support on any other CSI v1.1 compatible distribution, please use this forum to discuss it.

What about future releases of k8s?
In the next release, the objective is to support at least version n-2 of the current Kubernetes version at the moment of the release.

What operating systems are supported for Kubernetes nodes?

The driver was qualified with Red Hat Enterprise Linux and CentOS 7.6, 7.7, 7.8. With Openshift we support both RHEL and RHCOS nodes.

How do I troubleshoot the driver?
The driver can be troubleshooting using the usual kubectl commands as any other k8s pod/resources.
Most often used commands are :
* kubectl get pods -n isilon : gives the status of the controller and drivers on every node
* kubectl describe pods isilon-controller-0 -n isilon : provides details on the deployment for the controller
* kubectl logs isilon-controller-0 -n isilon -c driver : logs the API calls between the driver and Unisphere

Which driver version is installed?
helm list -c ISILON_RELEASE

What version and model of Isilon/PowerScale versions are supported?
OneFS 8.1, 8.2 and 9 are supported.

Where to submit an issue against the driver?
Please create a discussion in the forum: https://www.dell.com/community/Containers/bd-p/Containers

or open a ticket directly to the support website: https://www.dell.com/support/

Is volume expansion supported?
Yes, volume expansion is not supported by the driver. It is not supported to reduce a volume size.

Why a volume in Isilon/PowerScale can be greater than the Volume size required by the PersistentVolumeClaim ?
By default, SmartQuota feature is disabled ; without it, nothing prevents a volume to be greater than its configured size in Kubernetes.

Can I run this driver in a production environment?
Yes, the driver is production-grade. Please make sure your environment follows the pre-requisites and Kubernetes' best practices.

What support does Dell EMC provide for the driver built via the GitHub sources?

Dell EMC is fully committed to supporting the driver image on Dockerhub built from the sources hosted on GitHub.

Do I need to have programming skills to use CSI driver?
No.

To use the driver, you need to have basic knowledge around Kubernetes administration (How to create a PV, How to use a Volume, etc.).

How can connect Dell EMC storage to Kubernetes running on VMWare?
There is no impact on the configuration or the usage of the Isilon/PowerScale driver if your Kubernetes nodes are hosted on a virtualized environment.

What do I do if I discover an issue with the code on the GitHub?
Please submit the question in https://www.dell.com/community/Containers/bd-p/Containers

or call customer support.

Browse By Board

Developer Blog

Devops Forum

Developers

MyService360 or Support Site API

Unable to fetch version of array error when running Ansible module

TechDirect APIs

List of all services tags

powerscale ansible role

Is this link still valid for latest version https://github.com/dell/ansible-unity

Request for API Access to Retrieve Dell Device Model Using Serial Number

Registration for TechDirect not functional

When running ansible script on the Powerstore it doesn't the pypowerstore python library when running

RBAC with CSI Unity deployment

PowerShell into PowerMax 8000

Ansible / NFS Modules - creating alias for NFS export

How do I install the ansible vxrail on my ansible server ?

FAQ / CSI Driver for Isilon/PowerScale

A big toast, celebrating Kubernetes 10th Birthday

Dell Support Resources

Latest Solutions

Data Refresh Latency in Open Vulnerability API: Is there a 30-day lag?

test color post

Unable to fetch version of array error when running Ansible module

Asset API Authentication

Unable to import PowerScale python library. Please install isilon-sdk. Please install the.